利用できるサービス |
---|
The 25458 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one 15906 5 in. DIN Rail Mounting Bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stoppers. A complete configuration would also include terminal strips, end plates, and jumpers.
続きを読むThe 25458 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one 15906 5-inch DIN Rail Mounting Bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stoppers. A complete configuration will also include pn 15920 Terminal Strips, pn 15907 End Plates, and pn 15909 Jumpers (see Ordering Info). The stoppers, terminal strips, and end plates are mounted onto the DIN rail bracket. The DIN rail bracket is mounted to an enclosure backplate using the kit’s screws and grommets.
The 25458 is often used in RWIS applications, and is ideal for connecting multiple 4 to 20 mA sensors to a CR200(X)-series datalogger.
Hardware Type | DIN rail mounting kit |
Why/When to Use | For connecting many wires to one terminal. |
Mounting Bracket Length | 12.7 cm (5 in.) |
Mounting Space to Hold Parts | 10.1 cm (3.98 in.) Can connect up to 33 items depending on width of items. |
Weight | 68.04 g (0.15 lb) |
The 25458 can be used in any of our enclosures.
25458に関するよくある質問の数: 2
システムに複数の CS650 または CS655 センサがある場合は、多数のワイヤを 12 V 電源に接続し、多数のワイヤをアースに接続する必要があります。DIN レール マウント キットは、多数のワイヤを同じ電源に整理して接続するのに役立ちます。詳細については、5458 DIN レール ターミナル キットの取扱説明書を参照してください。
ターミナル ストリップやワイヤー ナットなど、複数のワイヤを接続する他の方法も使用できます。
The 25458 5-inch DIN Rail Mounting Kit can be used when many wires need to be connected to one terminal. Another option is to use a wire nut to gang multiple wires together and to run one pigtail to one of the data logger universal terminals or control ports.
We've updated our privacy policy. 詳細はこちら
Update your cookie preferences. クッキーの設定を更新する