Coaxial Cables / COAXRPSMA
COAXRPSMA LMR195 Antenna Cable with Reverse Polarity SMA and Type N Pin (Male) Connector

概要

The COAXRPSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and a Reverse Polarity SMA (RPSMA) pin (male) connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.

続きを読む

イメージ

詳細

The COAXRPSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and a Reverse Polarity SMA (RPSMA) pin (male) connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use.

The COAXRPSMA is recommended for cable lengths less than 10 ft. If the cable needs to be longer, the COAXNTN coaxial cable and a surge suppressor kit are recommended.

仕様

Cable Type LMR195
Connector 1 Type N pin (male)
Connector 2 Reverse Polarity SMA (RPSMA) pin (male)
Bend Radius 1.27 cm (0.5 in.)
Operating Temperature Range -40° to +85°C
Impedance 50 ohm
Attenuation
  • 14.6 db/100 m (4.4 db/100 ft) @ 150 MHz
  • 25.5 db/100 m (7.8 db/100 ft) @ 450 MHz
  • 36.5 db/100 m (11.1 db/100 ft) @ 900 MHz
  • 62.4 db/100 m (19.0 db/100 ft) @ 2.4 GHz
Weight 0.03 kg/m (0.021 lb/ft)

互換性

The COAXPRSMA is compatible with any device requiring a Type N to RPSMA cable with an impedance of 50 ohm. The COAXRPSMA is often used with the NL240, CWB100, CR200-series, AVW200-series, CRVW3, and the following series of Campbell Scientific spread-spectrum radios: RF400, RF401, RF401A, RF407, RF412, RF422, and RF430.

ドキュメント

以下に記載

下記製品のその他アクセサリです：
下記製品の共通アクセサリです：
以下の製品の交換部品:
下記の製品は置き換えられました

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する