Im trying to connect the CR1000 to the NL240 Wireless Network Link Interface. I got the following issue when configuring the NL240, I can only connect to the datalogger via WIFI when both NL240 and Loggernet are connected to the same network, to the same SSID.
How can I configure the NL240 modem so that remote connection is possible? I would like to connect to the CR1000 datalogger from a remote computer.
Many thanks,
Raül
A public IP address would need to get routed to the NL240. Here is a good article to read for some basic understanding of IP communications.
https://www.campbellsci.com/blog/ip-communication-for-datalogger-users
You would need port forwarding rules in routers to get from a public IP address to the NL240.
https://en.wikipedia.org/wiki/Port_forwarding
If you don't have security priviledges needed for port forwarding, you could use a public IP address in between for both the NL240 and Loggernet to connect to. One option for that is the Konect Pakbus Router service.
https://www.campbellsci.com/blog/solution-for-ip-communication-problems