Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Send information/ data from CR6 Datalogger to FTP server.

jongoodson Nov 13, 2017 03:44 AM

Hi guys, i'm really really newbie on the datalogger thingy.

I got 1st project to create scheduler task: Send information/ data(temperature,conductivity,pH etc.) from CR6 datalogger (https://www.campbellsci.com/cr6).
to our FTP server .

My questions are:
1.Does CR6 has a feature to send the data to FTP server build in? (i have explored the features and cant find it)
2.If the feature is not there, do I need to build separate FTPclient (PC etc.)  to send the data to FTP server?
3.If CR6 able to send these information/data to FTP server, it means CR6 should has a internet connection, right?
So, how can i set the internet connection on the CR6?

Currently i used PC200W as a software to connect to CR6 device.

Thanks in advance.

Regards.

* Last updated by: jongoodson on 11/13/17 @ 4:40 AM *
jra Nov 13, 2017 03:47 PM

You can add this feature to your CR310 program using the CRBasic Editor. 

https://s.campbellsci.com/documents/us/technical-papers/ftp-streaming.pdf

The CRBasic Editor is a part of LoggerNet, PC400, or can be purchased in a stand-alone format. Contact your local Campbell Scientific office for details. 

jongoodson Nov 14, 2017 02:45 AM

Hi jra,

As i'm using CR6, can i add CRBasic Editor to CR6 program? 

Regards,

jra Nov 14, 2017 03:28 PM

Yes, you can write CR6 programs in the CRBasic Editor. I don't know why I said CR310. 

Log in or register to post/reply in the forum.