Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

DS18B20 one-wire sensor


raichlebw Dec 1, 2017 04:14 AM

Hi all!

Has anyone used a CR1000 to log a set of DS18B20 one-wire temperature sensors? Any help would be appreciated.

Thanks,


JDavis Dec 1, 2017 03:40 PM

You cannot physically connect them directly. You need to use a 1-Wire to RS232 adapter.

The adapter will have a manual that describes how RS232 commands correspond to 1-Wire commands. You also need to read the manual for the temperature sensor to see what commands you need to use and how the data is formatted. 

For an experienced programming, it would be two full days of work.


hcorvalan Jun 4, 2024 02:46 PM

This post is under review.

Log in or register to post/reply in the forum.