Hi there,
since last OS version (CR1000 and CR1000X at least) the ppp parameters we were using with our old modems do not work anymore.
The ppp connection is established but after few seconds it gets out. The message, when entering the sniffer in that "com port":
"password verified Ok", and then:
"Normal Termination by NCP"
I also noticed that there is a DNS value by default that cannot be changed:
208.67.222.222
Our telecom provider gave us IPs and DNS for the VPN connection so I don´t know if that´s the issue.
This happens in all Com ports we have used, either with CS105 or directly into the RS232 and with different baud rates.
I hope you can give us some input
thanks