Hello everyone,
I'm trying to remote access one weather station with the CR10X datalloger. The idea would be to communicate the module to a modem using the WIZ110SR module ( https://www.wiznet.io/product-item/wiz110sr/ ) and thus be able to access the datalloger remotely. So I would like to know if the communication protocol with the datalloger is open and the necessary commands that I should send to perform the data collection. All suggestions are welcome, thanks in advance.
Hi
from CS web site you can download the free PC200W sw.
https://www.campbellsci.com/downloads/pc200w
It is a package of applications that complete the total use of functionality with the logger, with the limit of local connection to a PC serial port, virtual serial port in your case.
Smile