I'm trying to make a near real-time (updated every hour) connection to a stream gage with a TX321 Receiver. I'm collecting water level and temperatura data in a CR800. I have the data logger and TX321 programed and configured to collect and send data to the GOES Satellite. I can login to the GOES system (https://dcs4.noaa.gov/Account/Login) and see the data, and I can use the DCP Message Browser program to download data to my computer (where my loggernet software is) manually. Is there is a way to automate this process on a schedule using the Tasks Master Program?
Is there a better way to make the RTMC/loggernet and TX321 connection?
The other problem I might have this the format the data is in when I downloaded it, see below.
CBC00F4E19043160432G33+0NN040WUB00206
+12.56,+6.547,+2.419,+43.20,+4.700,+5.714,+3.295,
+12.55,+6.547,+2.412,+43.20,+4.700,+5.706,+3.295,
+12.55,+6.547,+2.412,+43.20,+4.700,+5.706,+3.295,
+12.54,+6.524,+2.401,+43.20,+4.700,+5.696,+3.295,
CBC00F4E19043150432G34+0NN040WUP00206
+12.54,+6.524,+2.396,+43.20,+4.700,+5.691,+3.295,
+12.54,+6.504,+2.392,+43.20,+4.700,+5.686,+3.295,
+12.54,+6.482,+2.377,+43.20,+4.700,+5.671,+3.295,
+12.54,+6.461,+2.374,+43.25,+4.700,+5.668,+3.295,
CBC00F4E19043140432G33+0NN040WUP00206"
+12.54,+6.461,+2.367,+43.29,+4.700,+5.662,+3.295,
+12.54,+6.439,+2.357,+43.25,+4.700,+5.651,+3.295,
+12.54,+6.439,+2.357,+43.29,+4.700,+5.651,+3.295,
+12.53,+6.439,+2.338,+43.29,+4.700,+5.633,+3.295,
Each download contains a one hour interval time/date/id stamp "CBC00F4E19043160432G33+0NN040WUB00206" and four lines of data corresponding to data collected at 15 minute intervals. In order to display in RTMC, I will need to convert those stamps to a more tradional data time format. Any ideas of how to do this?
Thanks for any help or ideas.