Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Can I use a 7 db Omni anntenna on an RF 451 Spread Spectrum System without exceeding the allowable Db output


RonS Jun 4, 2019 04:38 PM

I have a VHF radio sysem that works welI but I would like to update to Spread Spectrum.  Our service area is in an L shape and uses two repeaters to reach around a protruding range of foothills.  The protruding hill is a popular spot for commercial communicators like Syringa and other providers, etc so I have stayed out of that league.  My longest link is 18.82 miles from the Base Station to one Repeater.  I have tested the link and acheived connedtion between two 3 Db Onmi antennas but the connection is weak and I could not succesfully download a program to a logger.  There is no ground interference between the two sites but some folage may be inbetween at the Base Station end which is downtown.  Any advice would be appreciated.   

Thanks, RonS

Log in or register to post/reply in the forum.