Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

issues communication with Vaisala WXT536

Shanks.J Aug 5, 2019 04:23 AM

Hi there,
Cannot connect to Vaisala WXT536 weather station,

throuhg USB it is fine but throuhg the CR6 we cannot even connect via terminal mode, 
any advice would be great thank you

meteor Aug 7, 2019 07:25 AM

Hi,

i have a WXT520 with CR1000X.

CRBasic:
==========================
Public WXT520(7)
...
SDI12Recorder (WXT520(1),C5,0,"R!",1.0,0)
==========================

How Is the WXT sensor configured?
Address?
Protocol SDI-12?
Continuos measurments activated?
User port settings SDI-12?

meteor Aug 7, 2019 07:47 AM

The port CR6 should be U5 (?)

* Last updated by: meteor on 8/7/19 @ 7:48 AM *
Shanks.J Aug 7, 2019 08:25 PM

thanks for your reply, running of addres12 have got it running in U3 at this stage along with some other sensors.
realised that both Tx and Rx have to be combined into the com port, have never had a sd12 that requires this. 
have resolved issure for now. but am welcome to any advice.

how have you found continuous monitoring? good/bad?

Log in or register to post/reply in the forum.