It is my understanding that the CR6-RF407 uses SDC7 for the internal RF407. In the settings table under "ComPort Settings", there is a setting for beacon interval under both SDC7 and ComRF. Which one do I use for the RF407 beacon interval? Thanks,
With the CR6-RF407, the radio is internal (inside the CR6's case/body), so the port used is ComRF. That is the one you need to set the beacon interval on. When using a standalone RF407 connected to the CR6 via CS I/O, the default commumications port address is SDC7. I think that is where the confusion is coming from.
Thank you. And a CELL-205 connected to the CR6-RF407 via the CS-I/O port defaults to SDC8?
Yes, that is correct.