Hello
we installed our new Irgason to test it. on the other hand we do not manage to run correctly the software "Easy Flux PC". they are coming out the following mistake
Could you give me a manual for "Easyflux PC"?
*******************
Executing EddyPro
*******************
EddyPro-RP, version 6.2.0, build 2016-08-17, 10:43.
*******************
Executing EddyPro
*******************
Reading EddyPro project file: C:\Users\Chakir\Desktop\irgason_test\ini\processing.eddypro..
Done.
Retrieving file names from directory:
"C:\Users\Chakir\Desktop\irgason_test\"
1 files found.
Retrieving timestamps from file names.. Done.
Done.
Reading alternative metadata file: "C:\Users\Chakir\Desktop\irgason_test\ini\datafile.metadata"..
Warning(84)> Implausible displacement height value detected.
Warning(84)> Displacement height defaulted to 0.67 times the canopy height.
Warning(85)> Implausible roughness length value detected.
Warning(85)> Roughness length defaulted to 0.15 times the canopy height,
Warning(85)> or to 1.0mm if canopy height is zero.
Warning(1001)> Invalid metadata.
Warning(1001)> Attributes of a "generic analyser" (path lengths and time constant) must be positive numbers.
Warning(1001)> Problem detected for column n. 8
Fatal error(23)> Occurred while validating "Alternative metadata file".
Fatal error(23)> Check entries in the "Metadata file editor" and try again.
Fatal error(23)> Program execution aborted.
process exited with a failure code
Starting flux computation and correction session..
Reading EddyPro project file: C:\Users\Chakir\Desktop\irgason_test\ini\processing.eddypro..
Error(87)> Entered or inferred "Binned co-spectra files directory" does not exist.
Error(87)> EddyPro cannot perform spectral assessment, calculate ensemble averaged spectra
Error(87)> or calculate ensemble averaged co-spectra.
Error(87)> Continuing by switching to Moncrieff et al. (1997) spectral corrections
Error(87)> if an in-situ method was selected, and ignoring selection of ensemble
Error(87)> averaged spectra or co-spectra outputs
Done.
Initializing retrieval of EddyPro-RP results from file:
"none"..
Fatal error(60)> Occurred while opening or reading "essentials" file.
Fatal error(60)> Execution will be aborted, but you may be able to avoid re-processing raw data
Fatal error(60)> by fixing the problem with the "essentials" file and using the option
Fatal error(60)> "Previous data directory" in the "Basic Settings" page.
Fatal error(60)> Please consult software documentation.
Fatal error(60)> Program execution aborted.
process exited with a failure code
up
This post is under review.
up ?