Setup:
cr3000
nl115 with cf card
since 5 years 8 cr3000 logger each 10 pt100, 6 humidity sensor, 4 heat flux sensor in operation
every hour active ftp transport to network drive
when ftp is unable to transport the .dat file completely (with ftpclient(.....) command) only a zero byte file is generated on the drive
the logger settings become corrupted as in the topic described
how could the network problem to have an impact to the settings and erase the IP and run options (no restart of logger)?
the ftp transport problem is seldom (2-4 times a year) but it is very annoying