Hello, I consult for a problem that I have with an MD-485 network, I have 2 MD485 configured as CS I / O <--> RS-485 Transparent communication mode, connected to a CR10X in each one and they work correctly in LoggerNet, when I change the configuration to MD9(255) mode => MD9(1), MD9(2), MD9(3).... stops working, try to update the MD-485 with the latest OS-5 and they don't work either ...it only works with Transparent protocol
Configurations for MD9 Master
MD9 Master(255)
Active ports: RS-232 and RS-485
Protocol Configutation : MD9 Emulation
MD9 Address : 255
Baud: 9600 (all)
CS I/O Mode: Modem Enable
Configuration for MD9 Eslave
MD9 Master(255)
Active ports: CS I/O and RS-485
Protocol Configutation : MD9 Emulation
MD9 Address : 1
CS I/O Mode: Modem Enable
Baud: 9600 (all)
IS NOT WORKING !!!!!