Hello,
We are using a CELL215 with our CR800 datalogger. Beacause it is an autonomous installation with battery and solar pannel, we try to minimize the power consumption.
The CELL215 is connected with the CS-IO cable (PPP on SDC7) and we use terminal commands to control it on SDC11. The problem is, when we try to put the modem into DEEP SLEEP, it wakes up directly, but only when the programm is running.
When the programm is stopped, it is working perfectly and CELL215 stays in deep sleep.
Do you have any clues about what's occuring ?
Thanks for your help.