Can I have simultaneous connections to a CR310 using an:
1. Ethernet cable to the ethernet port configured on ethernet tab of Dev Config Utility
2. GSM modem on the RS232 port configured through coms ports, PPP and network services (pakbus/tcpclients) tabs in Dev config Utility.
Thanks!
Alistair
Yes, but with caveats. Depending on what you are doing with the logger you will likely notice no difference in any of the connections. A big problem, and one I see often is IF you are logging a hundred or so data points every second, while also collecting every second, you will see some lag develop with multiple connections.
Thanks Curt_Ingram. I managed to get it to work using the Iprouter function in CRBasic.
Since it is a simple weather station scanning at 1s and writing to output storage avery 5 min, there hasn't been a lag.
Regards
Alistair