I asked this in a similar thread, but haven't recieved a reply.
I am seeing issue with RTMC 5 . RTMC will not respond for a few mintues on startup, and seems to drag if you manually go to view a different page.
I'm also experiencing and issue with data collection taking along time on some of our locations. Radio error rates are 2% or less and oddly they are sites that only read a single sensor for stage, batery voltage, and a time stamp.
Finally is RTMC 4.x compatable with Loggernet 4.7? We purchased RTMC Pro 5 because our old RTMC project would not opperate correctly with Loggernet 4.7.
I have the same issues.
I use RTMC 4 again, much faster response.
With the kindest regards.
Thanks for the reply.
Unfortunately i was RTMC 4 stopped working correctly for me while I was using Loggernet 4.6 so I upgraded to 4.7. After that RTMC 4.x would not work at all. So I got RTMC 5 Pro and here I am.
I hope to hear from someone with Campbells on this issue.
Well it's been almost a month and no reply from Campbell Sci.
I used loggernet 4.7 and rtmc pro 5 but wasnt happy with it at all.
Loggernet 4.7 was much slower compared to 4.6
RTMC Pro 5 was behaving laggy, and in runtime i wasnt able to scroll the screen and the graphs had thick lines, while in pro dev it behaved as it should.
And i miss the setting screen to speed up things in RTMC Pro 5, like in 4.3.3.6:
I am now using Loggernet 4.6 and RTMC Pro 4.3.3.6
Everything works and is responsive.
Updates are not always better:(
Specs:
CR1000
Windows 11 Pro x64
8 GB memory
Intell i5 processor
SSD HD.