Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR6 can't connect remotely


everhamme Aug 21, 2022 11:20 PM

I've got multiple newly deployed systems with CR6 paired with a RV50x or RV55 that have lost ability to connect over port 6785 via loggernet.  one is using serial/PPP and other is using ethernet.  CR6 is running version 12 and RV50/55 are running 4.14.0 or 4.15.0.  are there any known issues with these firmware pairings?  


JDavis Aug 23, 2022 06:39 PM

Check the status of the Konect Pakbus router you are using. No CR6 issues are expected, particularly the one using Ethernet to the modem.

Log in or register to post/reply in the forum.