Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

FTP Push not workin


Martin Gingins Feb 16, 2023 08:24 PM

Hi,

CR300
Current Version: 10.07
CR3XX-WIFI
Current Version: 1.07.12 

We have a simple program done by Scottech NZ that reads a vibrating wire piezometer and deliver dat files into an FTP server.

FTP server and similar program has been used before without any problem, same configurations.

This new CR300 WIFI is not sending the data (FTP_Sent remains 0).

The logger is connected to a wifi network with DNS resolutions and DHCP server. Can see the logger in the network, can browse to it without any inconivinients.

Wifi Status:

Wi-Fi is the default network.
Connected to "Shed"
MAC: 00d02c156537
IP: 192.168.1.30
mask: 255.255.255.0
gw: 192.168.1.1
IPv6 local: FE80::2D0:2CFF:FE15:6537
dns: 192.168.1.1
dns: 8.8.8.8

Can I please get help to troubleshoot this?

Thanks

Martin


yegola3580 Jan 8, 2024 08:38 PM

This post is under review.


miq Jan 21, 2024 05:12 PM

Could be firewall issue. Ability to see the logger in the network does not mean it is 100% permitted to jump over the firewall.

Log in or register to post/reply in the forum.