Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR6-Wifi dont connect to internet


XxVashxX Sep 9, 2023 02:45 PM

I configure many times many dataloggers (CR6, CR300, etc) to connect to Wifi, in this case i have a CR6-WIFI that only have internet access if i use DHCP on the datalogger... when i try to put a static IP (Im shure that IP, MASK and GATEWAY are OK) the datalogger simply dont have internet acces, DL is connected to the LAN network and i can ping to IT, but no internet acces... If i change to DHCP again it works well...

Can you gave me a hint to solve this? (I install this same datalogger several times in different networks in the past with static IP with no problems but now dont work .... i try in different networks to discard a network restriction but doesnt work with static IP)

Thank you for your help

PD: When i connect to the datalogger a update appear to WIFi 5.03.... i search for this upgrde in the website but last update i found to download is WIFI 5.02.... I update to WIFI OS 5.03 and also try with WIFI OS 5.02 but same result


hydesammy Feb 1, 2024 06:54 AM

Double-check the static IP, subnet mask, and gateway settings to ensure they are correct. Any typos or errors in these settings can cause connectivity issues.

Log in or register to post/reply in the forum.