Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

logging of seperate power rail


cellectronic Sep 26, 2023 01:42 PM

Hi All,

We have a CR1000 based solar powered weather station at a remote location , This station forwards data to our server at hourly intervals.

The communications for the CR1000 is via a LAN and wireless communications radio link .

The communication link is powered from a seperate power supply which is also solar powered and isolated from the CR1000 power.

What I wish to do is log the voltage on the secondary power supply for the communications ( I am already doing this for the Weather station PSU).

which would be the best way to achieve this , any ideas would be appreciated.

Regards 


JDavis Sep 26, 2023 07:57 PM

VDIV10:1   With the voltage divider, you can read up to 50VDC on the CR1000.

Also connect the ground connections between the two power supplies if not using a common ground already.


bryceparson Oct 3, 2023 03:24 AM

This post is under review.

Log in or register to post/reply in the forum.