Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

How to integerate logger net with CR1000x to have remote access to the datalogger.


SamuelPius Mar 2, 2024 07:53 AM

Hi Team,

I am facing difficulties in integrating the loggernet with the CR1000x datalogger but it is not working out. Is it because i am using a TRB140 modem here which is connected to the cr1000x using an ethernet for internet. It has a static IP sim card being used here.

Please guide with your know hows regarding this issue.

Thanks and Regards,

Samuel


squigglysmile Mar 11, 2024 02:10 AM

This post is under review.


smile Mar 11, 2024 06:42 AM

using a browser, by typing the fixed and public IP address, can you reach the router? Does ping work?

Maybe you need to make a port forwarding rule. When the loggernet packets on port 6785 reach the router they must be forwarded to the fixed LAN IP of the data logger, for example 192.168.1.3

Smile

Log in or register to post/reply in the forum.