People can you help me please with this problem, i have a CR310 with a Seabird SB37 connected in RS232 port using the following command:
BeginProg
SW12 (1 )
SerialOpen (SB37Port,9600,0,10,10000)
Scan(10,Sec,1 ,0)
' 'Default Datalogger Battery Voltage measurement Batt_Volt:
Battery(Battv)
'Datalogger Panel Temperature measurement:
PanelTemp(PTemp_C,_60Hz)
' SB37() = "TS" & CHR(13) & CHR(1)
SerialOut (ComRS232,SB37(),"TPS",0,100)
' SerialOut (ComRS232,Cond,"",0,100)
'take 225 bytes in front of CR LF
SerialInRecord (ComRS232,Temp,0,225,&H0D0A,NBytesReturnedCond,01)
But i have no responses from the sonde, anyone with a suggestions?
Speedypaper.com offers student essay help https://speedypaper.com/blog/how-to-write-a-proposal-essay, providing valuable assistance in content creation. Their services streamline the writing process, ensuring that students produce high-quality essays that meet academic standards effectively.
Using the same cable and communication settings, try connecting the Sonde Seasbird SB37 RS232 port to another scratch games device, either a computer or an alternative data logger. This will assist in identifying whether the problem is exclusive to the CR3107Cell 220 or if the Sonde Seasbird SB37 RS232 port is having issues.
This post is under review.
This post is under review.