Hi, I have a CR1000 connected with CSI/O via NL100 to intranet and no problem connecting to this via loggernet via default port 6785 with NL100 settings as below and logger settings below that.
However I have following problems with other forms of network comms
1/ if I try to ftp to the logger I cannot connect.
2/ the logger OS25 is doing UDP limited subnet broadcast as below but this does not seem to be getting out there.
Const WXPort = 7088
Socket1=UDPOpen ("255.255.255.255",WXPort,BroadcastLen)
SerialOut(Socket1,OutstringNet,"",0,0)
A similar set-up using a NL115 with a CR3000 seems to work all fine but operational site is using NL100 so would like to solve. Ideas appreciated.
NL100 settings
Setting Name
Setting Value
Company
Campbell Scientific, Inc.
Model
NL100
Version
8.0
PakCtrlCodes
129 9 137 14 13 12 2 5 10 138 11 139 15 143 16 144 19 147 7
TLink Configuration
Disabled
TLink -socket port number
6781
TLink -to-RS232 baud rate
115k
RS485 Configuration
Disabled
RS485 Baud Rate
38k
RS485 PakBus Beacon Interval (sec)
60
RS485 PakBus Verify Interval (sec)
0
RS485 neighbor list
0
RS485 serial server port number
6782
RS485 serial server AppId number
6782
CS I/O config
PakBus
CS I/O SdcAddr/bps
9600
CS I/O beacon interval (sec)
60
CS I/O PakBus Verify Interval (sec)
0
CS I/O serial server port number
6783
CS I/O serial server AppId number
6783
RS232 config
Configuration Monitor
RS232 bps
115k
PakBus beacon interval (sec)
60
RS232 PakBus Verify Interval (sec)
0
RS232 neighbor list
0
RS232 serial server port number
6784
RS232 serial server AppId number
6784
EtherNet 10BASE-T
enabled
10BASE-T port IP address
192.168.65.169
10BASE-T port network mask
255.255.255.0
IP address of the default gateway
192.168.65.254
PakBus Address of the NL100/105
2
Clock neighbor node Id
1
Central routers
0
PakBus/TCP server config
enabled
PakBus/TCP server port number
6785
PakBus/TCP client config
disabled
Server IP address
0.0.0.0
Server IP port number
6785
Modbus/TCP gateway config
disabled
Telnet IP port number
23
Telnet session password
nl100
DevConfig security code
0
CR1000 LOGGER SETTINGS
Setting Name
Setting Value
OS Version
CR1000.Std.25
Serial Number
13,565
Station Name
13565
PakBus Address
1
Security Level 1
123
Security Level 2
1,234
Security Level 3
12,345
Is Router
0
PakBus Nodes Allocation
50
Baud Rate RS232
1200 Fixed
Baud Rate ME
9600 Auto
Baud Rate COMSDC
115200 Fixed
Baud Rate COM1
0 (Not used for PakBus)
Baud Rate COM2
0 (Not used for PakBus)
Baud Rate COM3
0 (Not used for PakBus)
Baud Rate COM4
38400 Fixed
Beacon Interval RS232
0
Beacon Interval ME
0
Beacon Interval SDC7
0
Beacon Interval SDC8
0
Beacon Interval SDC10
0
Beacon Interval SDC11
0
Beacon Interval COM1
0
Beacon Interval COM2
0
Beacon Interval COM3
0
Beacon Interval COM4
0
Verify Interval RS232
0
Verify Interval ME
0
Verify Interval SDC7
0
Verify Interval SDC8
0
Verify Interval SDC10
0
Verify Interval SDC11
0
Verify Interval COM1
0
Verify Interval COM2
0
Verify Interval COM3
0
Verify Interval COM4
0
Neighbors Allowed RS232
Begin Range
End Range
Neighbors Allowed ME
Begin Range
End Range
Neighbors Allowed SDC7
Begin Range
End Range
Neighbors Allowed SDC8
Begin Range
End Range
Neighbors Allowed SDC10
Begin Range
End Range
Neighbors Allowed SDC11
Begin Range
End Range
Neighbors Allowed COM1
Begin Range
End Range
Neighbors Allowed COM2
Begin Range
End Range
Neighbors Allowed COM3
Begin Range
End Range
Neighbors Allowed COM4
Begin Range
End Range
Central Routers
Central Router
USR: Drive Size
265,216
Files Manager
Files Manager
Name Prefix
Number of Files
Max Packet Size
1,000
RS232 Always On
No
RS232 Hardware Handshaking Buffer Size
0
RS232 Hardware Handshaking Timeout
0
Ethernet IP Address
0.0.0.0
Ethernet Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Name Servers
Name Servers
0.0.0.0
0.0.0.0
PPP Interface
Inactive
PPP IP Address
0.0.0.0
Reserved
PPP User Name
PPP Password
PPP Dial
PPP Dial Response
CONNECT
PakBus/TCP Server Port
6,785
PakBus/TCP Client Connections
PakBus/TCP Client Connections
Port Number
HTTP Server Port
80
FTP Server Port
21
FTP User Name
anonymous
FTP Password
*
Ping Enabled
1
FTP Enabled
1
Telnet Enabled
1
HTTP Enabled
1
IP Trace COM Port
Inactive
IP Trace Code
0
TCP/IP Info
I am afraid that you cannot use any of the loggers TCP/IP functionality when connected via an NL100. That interface (now obsolete) only supported either terminal server, or pakbus connectivity to the logger. It does not pass raw TCP/IP/UDP traffic between the logger and the network.
You either need an NL115, NL120 or NL200 interface with the logger to use the loggers IP functionality (or a GPRS connection).
Greetings
Is this still true or has some changes been done to the OS to allow the functionality of TCP/IP to be used while connecting NL121 ?
The datalogger must be using OS28 or newer to use a NL116 or NL121.