I use a CR6 (OS 6.0) with 10 Hz logging (CSAT3, LI-7700) and some slow sequences (test without sensors).
==============================
SlowSequence
DataTable (Nieddaten,TRUE,-1)
DataInterval (0,10,Min,10)
TableFile ("CRD:Nieddaten",8,-1,0,24,Hr,OutStat3,LastFileName3)
Sample (1,Niedsensor,String)
EndTable
Scan(1, Min,3,0)
SerialInRecord (COMU7,Niedsensor,&H5354,0,&H4554,NBytesReturned,01)
CallTable nieddaten
NextScan
EndSequence
SlowSequence
DataTable (GPSdat,TRUE,-1) 'GPS
DataInterval (0,30,Min,10)
TableFile ("CRD:GPSdat",8,-1,0,1,Day,OutStat2,LastFileName2)
Sample(1,latitude_a,fp2)
Sample(1,latitude_b,IEEE4)
.......
EndTable
Scan(1, Sec,3,0)
GPS (latitude_a,COMU1,LOCAL_TIME_OFFSET*3600,0,nmea_sentence(1))
CallTable(GPSdat)
NextScan
EndSequence
==============================
The result GPSdat
"TOA5","4031","CR6","4031","CR6.Std.06","CPU:version26.CR6","51434","GPSdat"
"TIMESTAMP","RECORD","latitude_a","latitude_b","longitude_a","longitude_b","speed","course","fix_quality","altitude_Min","altitude_Max","gps_ready","nmbr_satellites","nmbr_clock_change"
"TS","RN","","","","","","","","","","","",""
"","","Smp","Smp","Smp","Smp","Smp","Smp","Smp","Min","Max","Smp","Smp","Smp"
"2017-03-11 03:30:00",41,50,58.72,13,34.83,0,226.8,2,253,255.9,0,6,0
"2017-03-11 04:00:00",42,50,58.72,13,34.84,0,226.8,2,255.1,255.9,1,8,0
"2017-03-11 04:30:00",43,50,58.72,13,34.85,0,226.8,2,243,255.1,0,8,0
.............
"2017-03-11 23:30:00",81,50,58.72,13,34.84,0,6.4,2,242.1,246.8,0,8,0
"2017-03-12 00:00:00",82,50,58.72,13,34.82,0,258.7,2,233.2,246.5,0,9,0
00:30:00 to 03:00:00 is missing.
The result Nieddaten
"TOA5","4031","CR6","4031","CR6.Std.06","CPU:version26.CR6","51434","Nieddaten"
"TIMESTAMP","RECORD","Niedsensor"
"TS","RN",""
"","","Smp"
"2017-03-11 23:10:00",242,"NAN"
"2017-03-11 23:20:00",243,"NAN"
"2017-03-11 23:30:00",244,"NAN"
"2017-03-11 23:40:00",245,"NAN"
"2017-03-11 23:50:00",246,"NAN"
"2017-03-12 00:00:00",247,"NAN"
Logger started 2017-03-10, 00:10:00 to 23:00:00 is missing.
If i change "Tablefile" from
TableFile ("CRD:GPSdat",8,-1,0,1,Day,OutStat2,LastFileName2)
to
TableFile ("CRD:GPSdat",64,-1,0,1,Day,OutStat2,LastFileName2)
and
TableFile ("CRD:Nieddaten",8,-1,0,24,Hr,OutStat3,LastFileName3)
to
TableFile ("CRD:Nieddaten",64,-1,0,24,Hr,OutStat3,LastFileName3)
it works.
The same problem with TableFile ("CRD:GPSdat",4,-1,0,1,Day,OutStat2,LastFileName2)
renewed tested - it's a BUG!