6182 Replacement 7 Ah Sealed Rechargeable Battery for PS100 or PS150

Overview

The 6182 is the internal 7 Ah sealed rechargeable battery contained in the PS100 and PS150 power supplies. This battery is available as a replacement part.

Read More

Images

Detailed Description

The 6182 battery was slightly redesigned in the Autumn of 2003, and now features the 17200 cable that connects the battery to the power supply. The 17200 cable is fitted with slip-on connections for the battery posts (in the earlier design, the leads were soldered onto the battery posts). The redesign allows the cable to be disconnected and replaced.

Specifications

Output Voltage 12 Vdc
Nominal Rating 7 Ah
Weight 2.72 kg (6 lb)

Compatibility

The 6182 is used with the PS100 and PS150 power supplies.

Frequently Asked Questions

Number of FAQs related to 6182: 7

Expand AllCollapse All

  1. Do airlines accept the 6182 on passenger planes as accompanied luggage?

    Check with the airline. Mention that the 6182 is a sealed, valve-regulated lead-acid (VRLA) battery.

  2. If a fully charged 6182 or 17894 battery is used without a wall charger or solar panel, how long will the battery continue to supply power to a data logger?

    This depends on the current drain of the system. For more information, see the “Power Supplies” application note.

  3. How long does a 6182 or 17894 last after a full charge?

    This depends on the current drain of the system. In general, the battery can be made to last longer by following these steps:

    1. Just before measuring the high-current sensors, slow down the scan interval of the data logger program and switch on the sensors.
    2. Just after the sensors stabilize, take the measurements.
    3. Turn the sensors off immediately.

    Communication can also greatly affect the battery charge. Turn off any communications devices as much as possible to delay the battery discharge. 

    Adding a solar panel and working out a power budget can balance out the charge with the discharge so that the system can be stable indefinitely. For more information, see the “Power Supplies” application note.

  4. What is involved in replacing the battery of a PS100?

    To replace the battery (pn 6182), follow these steps:

    1. Turn off and disconnect the power to the PS100.
    2. Unlatch and slide off the cover.
    3. Disconnect the battery clip.
    4. Lift out the old battery, and slide in the new battery. 
    5. Reconnect the power, and turn the PS100 on. 
  5. Is the 6182 the replacement battery for the ET107?

    Yes.

  6. What type of battery are the 6182 and 17894 (for example, nickel, alkaline, etc.)?

    The 6182 and 17894 are valve-regulated lead-acid (VRLA) maintenance-free batteries, also known as sealed, lead-acid batteries.

  7. How can the age of a sealed rechargeable battery be determined?

    Look for a stamp on top of the battery. The stamp may be in a date format of YYMMDDXX where:

    • YY is the year.
    • MM is the month.
    • DD is the day.
    • XX is the manufacturing plant.

    This indicates the age of the battery.

Visit the FAQ Library

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences