This product is no longer available and has been replaced by: SP10.
Image Not Available
| 利用できるサービス | |
|---|---|
| 修理 | 非対応 |
| キャリブレーション | 非対応 |
| フリーサポート | 非対応 |
概要
The SP10-PW is a 10 W photovoltaic power source capable of recharging batteries. Its 6.1 m (20 ft) cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure. The connector in the enclosure then leads to a power supply or battery base to recharge the battery, allowing unattended operation of systems in remote locations, far from ac electrical sources.
This solar panel has a sufficient charging source for many of our system configurations in tropical to temperate latitudes.
続きを読む利点と特徴
- Supplies electrical power in locations where ac power is unreliable, expensive, or not available
- Quick, secure connection to Campbell prewired enclosures for more efficient setup
- Recharges the sealed rechargeable battery of a PS150, PS200, BP12 (requires CH150 or CH200), BP24 (requires CH150 or CH200), CR3000, CR5000, CR6, or CRVW3
詳細
The SP10-PW includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].
仕様
| -NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
| Maximum Peak Power | 10 W |
| Current at Peak | 0.59 A |
| Voltage at Peak | 16.8 V |
| Dimensions | 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.) |
| Weight | 2.1 kg (4.6 lb) |
互換性
Battery
The SP10-PW is intended to recharge 12 V Gel Cell or AGM lead acid batteries such as the batteries used with the PS150, PS200, BP12, BP24, CR3000, CR5000, and CR6. It is not intended for user-supplied 12 V flooded batteries such as deep cycle marine or RV batteries.
ドキュメント
テクニカルペーパー
よくある質問
SP10-PWに関するよくある質問の数： 1
-
レギュレータはバッテリに流れる電流を制御し、バッテリ電流が充電源に流れるのを防ぎます。これらのソーラーパネルにはオンボード電圧レギュレータが搭載されていないため、電源を完成させるにはスタンドアロンのレギュレータが必要になります。
通常、これらのソーラー パネルは、CH100、CH200、PS100、または PS200、および CR3000 または CR5000 のバッテリ ベースに接続されます。PS100 と PS200、および CR3000 と CR5000 のバッテリ ベースには、内部レギュレータが含まれています。
以下に記載
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する