TS100SS Aspirated Radiation Shield

Name: 43502-L - Compact Aspirated Shield
Brand: Campbell Scientific

Request Quote Ask a Question Ask a Question

Minimize Errors in Temperature Measurements
With a low-powered solution

Images
Similar Products
Specifications
Compatibility
Documents
Articles
Associations

Overview

The TS100SS, manufactured by Apogee Instruments, Inc., is a fan-aspirated radiation shield that minimizes temperature-measurement errors caused by incident solar radiation. The unique aerodynamic shape and rugged, low-power fan make it the first research-grade fan-aspirated shield that is practical for use on battery- or solar-powered stations. The shield provides excellent sensor protection and accommodates various combinations of thermistors, PRTs, and humidity sensors using one of the sensor port adapter plugs.

Typical applications include air temperature and humidity measurements in weather networks, often for weather forecasting, and solar energy sites. Fan-aspirated shields are also important in the precise measurement of air temperature and humidity gradients above the land surface and in climate change monitoring.

Benefits and Features

Low-powered fan suitable for solar-powered systems
Aerodynamic design for continuous operation in high winds
Logger-controlled fan speed for power reduction to < 25 mA

Images

Similar Products

43502-L Compact Aspirated Shield

Specifications

Difference among Individual Replicate Shields	< 0.1°C
Aspiration Rate	6 m/s (at full speed) 3 m/s (at half speed)
Fan Input Voltage Requirement	10.8 to 13.2 Vdc
Fan Current Drain	80 mA (at full speed) 25 mA (at half speed)
IP Rating	IP55
Warranty	4 years (against defects in materials and workmanship)
Diameter	27 cm (10.63 in.)
Height	22 cm (8.66 in.)
Weight	840 g (29.6 oz)

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Sensors

Product	Compatible	Note
HMP60-L
HygroVue 5

Miscellaneous

Product	Compatible	Note
CS250DM (retired)

Additional Compatibility Information

If you would like to use the TS100SS with sensors that are different from those listed in the table, please contact Campbell Scientific directly to discuss compatibility.