Charge Regulators and DC Adapters Also known as charge controllers to connect rechargeable batteries to a charging source

Power / Charge Regulators and DC Adapters

About Charge Regulators and DC Adapters

Charge regulators, or charge controllers, must be used to connect sealed rechargeable batteries with a charging source (such as an ac transformer or solar panel). Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. In addition to the stand-alone regulators listed here, regulators are incorporated in some of our products.

Product Line
Retired Products
Documents

Product Line

CH150 12 V Charging Regulator

The CH150 is a charging regulator for an external rechargeable 12 V VRLA (valve-regulated lead-acid) battery, such as the BP12 or BP24 offered by Campbell Scientific. Charging power for the CH150 is t...read more

CH201 12 V Charging Regulator

The CH201 is a microcontroller-based smart charge controller that is ideal for charging 12 Vdc VRLA batteries. The charger uses MPPT (maximum power point tracking) technology to safely manage amp...read more

CH200 Smart 12 V Charging Regulator

The CH200 is microcontroller-based smart charge controller that is ideal for an external rechargeable 12 Vdc VRLA battery such as Campbell Scientific's BP12 or BP24. The controller manages amperage an...read more

PS150 12 V Power Supply with Charging Regulator and 7 Ah Sealed Rechargeable Battery

The PS150 is a 12 Vdc power supply that includes a rechargeable 7 Ah valve-regulated lead-acid (VRLA) battery and charging regulator. Charging power for the PS150 is typically supplied by an unre...read more

38898 SunSaver MPPT 15 A Charge Controller for 12 or 24 V Batteries

The 38898 consists of a Morningstar 15 A charge regulator that has been re-configured by Campbell Scientific and includes the mounting hardware to mount it to a 2.54 cm (1 in.) grid back panel. This c...read more