三脚 / CM10
RETIRED ›
This product is no longer available and has been replaced by: CM106B.
CM10 10-foot Galvanized-Steel Instrument Tripod
利用できるサービス
修理 非対応
キャリブレーション 非対応
フリーサポート 非対応

概要

The CM10 is a galvanized-steel tripod that provides measurement heights up to 10 feet (3 meters) and support for attached sensors and mounts, solar panels, and environmental enclosures. The tripod legs are individually adjustable allowing adjustment of our wind set's measurement height, and tripod installation over uneven terrain.

続きを読む

利点と特徴

  • Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels, environmental enclosures
  • Portable instrument mount
  • Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties included

イメージ

詳細

Constructed out of corrosion-resistant galvanized steel, the CM10 provides measurement heights of up to 10 ft (3 m). This general purpose instrument mount supports the attachment of sensors and mounts, solar panels, and environmental enclosures. Individually adjustable legs allow installation over uneven terrain. The CM10 includes lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties. An optional guy kit to improve the CM10’s wind load rating is also available.

仕様

Vertical Load Limit 45 kg (100 lb)
Mast 1.25 IPS (1.66 outer diameter)
Leveling Adjustment Slide collars on each leg adjust individually.
Portability Collapsible to 1.83-m length by 22.86-cm diameter (6-ft length by 9-in. diameter)
Leg Base 5.08 x 12.7 cm with 1.27-cm hole for ground stake (2 x 5 in. with 0.5-in. hole for ground stake)

Wind Load Recommendation

Sustained Wind Tolerance
  • 112.7 kph (70 mph) unguyed
  • 193.1 kph (120 mph) guyed
Gust Tolerance
  • 160.9 kph (100 mph) unguyed
  • 241.4 kph (150 mph) guyed

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Mounting Equipment

製品 互換性 注意
019ALU (リタイア)
CM202
CM202SS
CM203
CM204
CM204SS
CM206
UT018-5 (リタイア)

互換性に関する追加情報

Enclosure Brackets

The “-MM” mount option for our environmental enclosures is intended for mounting the enclosure to a tripod's mast. An enclosure ordered with this option will be shipped with a three-piece bracket mounted to the top of the enclosure and an identical three-piece bracket mounted to the bottom of the enclosure.


以下に記載

下記製品のその他アクセサリです:

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する