概要
The CM202 is a crossarm that attaches to an instrumentation tower or tripod. It provides a rugged, weather-resistant sensor mount for one sensor. The CM202 is compatible with all of our tripods, towers, and CM200-series brackets. It can also be attached to a user-supplied pole.
続きを読むイメージ
詳細
The CM202 provides a rugged, weather-resistant sensor mount for one sensor (typically). It consists of a 2-ft aluminum pipe and the CM210 mounting bracket kit. U-bolts included with the mounting bracket are used to attach the crossarm to a tripod mast, tower leg, or user-supplied vertical pipe (1.0” to 2.1” OD). All of our tripods and towers are compatible with the CM202.
A U-bolt mounting scheme allows the crossarm to be secured to the tripod or tower at the optimal measurement height for the sensor. The sensor is then mounted to the other end of the crossarm using a variety of mounts—depending on the sensor being deployed. The options available for mounting the sensor to the crossarm are listed as accessories under the Ordering information.
仕様
| Mounting Material | 304 stainless-steel bracket with stainless-steel U-bolts and hardware |
| Crossarm Material | 1 in. IPS anodized aluminum pipe |
| Pipe Outer Diameter | 3.34 cm (1.315 in.) |
| Pipe Length | 0.6 m (2 ft) |
| Weight | 1.04 kg (2.3 lb) |
互換性
注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
Mounting Equipment
| 製品 | 互換性 | 注意 |
|---|---|---|
| 1017 | ||
| 1049 | ||
| 17953 | ||
| 18098 | ||
| 26120 | ||
| 27065 | ||
| 30626 | ||
| 41003-5 | ||
| 41005-5 | ||
| 41303-5A | ||
| 41303-5A | ||
| 41303-5B | ||
| 43502-L | ||
| CM10 (リタイア) | ||
| CM106 (リタイア) | ||
| CM106B | ||
| CM110 | ||
| CM115 | ||
| CM120 | ||
| CM220 (リタイア) | ||
| CM221 | ||
| CM225 | ||
| CM230 | ||
| CM230XL | ||
| CM235 | ||
| CM245 (リタイア) | ||
| CM255 | ||
| CM255LS (リタイア) | ||
| CM6 (リタイア) | ||
| RAD06 | ||
| RAD10 | ||
| RAD10E | ||
| RAD14 | ||
| UT10 | ||
| UT20 | ||
| UT30 |
互換性に関する追加情報
Campbell Scientific Tripod and Towers
The CM202 can also be attached to a user-supplied pole (1.0 in. to 2.1 in. OD).
よくある質問
CM202に関するよくある質問の数： 1
-
Technically, the medium bracket (pn 31592) of the CMB200 Crossarm Brace Kit can be used with the CM202 crossarm, but Campbell Scientific does not recommend this usage.
以下に記載
- CM106 - 7-to-10 ft Galvanized-Steel-Tubing Tripod
- CM106B - 7 to 10 ft Galvanized-Steel-Tubing Tripod with Grounding Kit
- QST6 - 6 ft Quick-Setup Tripod for Temporary Installations
- CM120 - 20 ft Stainless-Steel Tripod with Grounding and Guy Kit
- CM110 - 10 ft Stainless-Steel Tripod with Grounding Kit
- CM115 - 15 ft Stainless-Steel Tripod with Grounding and Guy Kit
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する