User Forum A 24/7 resource for Campbell Scientific users

I had try to connect to the data logger, but was not connecting,  and it keep on showing a dialogue box saying data logger connection failed. Please help me how solve this problem. The logger was CR200Series. Thanks

Have you gone through these troubleshooting tips? 

https://www.campbellsci.com/blog/communication-problems-serial-connections 

https://www.campbellsci.com/blog/determine-if-datalogger-needs-repairing 

Good morning,

It still related to connection problem. I have done all the possible troubleshooting, but still not working. I don't know what to do next. Whenever I try to connect, it takes like 2 to 3 minutes before showing a box indicating communication failure. It shows log error message containing the following statements "failure and warning in red and blue colour respectively "transaction failure, time out or resource error,"get logger program status, then showed check/set clock there times.

Sorry the last sentence was three times not there times.

Thanks.

Sorry the last sentence was three times not there times.

Thanks.

Have you tried to connect  the logger by using a different computer? If yes, check your usb/serial cable

Dear MJMagaji

I understood so you want to connect by remote
if yes please specify equipments which do you use?
data logger
interface (if any)
modem
If the same with my equipments I will try help you.

best regads