CM216 Sensor Mounting Kit for Top of Tripod Mast
Designed for CM100-Series Tripods
気象 applications 水 applications エネルギー applications ガスフラックスと乱流 applications インフラ applications 土壌 applications

概要

The CM216 provides both a 3/4-inch IPS (1.05-inch OD) and a 1-inch IPS (1.32-inch OD) mounting pipe that extends 4 inches above the mast. They are pipes with an adapter that bolts to the inside of the top of a CM106B tripod; a stainless-steel CM110, CM115, or CM120 tripod; or a CM300, CM305, or CM310 mounting pole. A sensor with a 1.05- or 1.32-inch OD fitting (typically a wind sensor or the R. M. Young rain/snow gage) can then be mounted on this pipe.

続きを読む

イメージ

Unassembled CM216
Unassembled CM216

詳細

Note: The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.

仕様

Reach Extends 10 cm (4 in.) above the mast
Outer Diameter 2.67 to 3.34 cm (1.05 to 1.315 in.)
Pipe Size 1.9 to 2.54 cm (0.75 to 1 in.) IPS
Dimensions 20.32 x 7.62 x 5.08 cm (8 x 3 x 2 in.)
Weight 952.54 g (2.1 lb)

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Mounting Equipment

製品 互換性 注意
CM10 (リタイア)
CM106 (リタイア)
CM106B
CM110 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM115 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM120 The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods.
CM6 (リタイア)
QST6

互換性に関する追加情報

Wind Sensor Considerations

A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.

Sensors

The CM216 is compatible with sensors that have a 0.75 or 1 in. size (1 or 1.32 in. OD) pipe mount.


Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する