Displaying 1 - 8 of 8 articles
Author: Michael Adams | Last Updated: 04/23/2024 | Comments: 0
Have you read the South Dakota: Rock Stability in Large Underground Excavation case study? It’s a short and interesting read, so check it out if you haven’t already. In this blog article, we’ll take a deeper look at Campbell Scientific’s role in a large-cavern, hard-rock... read moreAuthor: Vim Mistry | Last Updated: 03/25/2024 | Comments: 0
Continuous learning in the environmental monitoring industry empowers individuals and organizations alike, fostering innovation, user engagement, and a growth mindset. If you haven’t read our “How Do You Put Learning into Action?” blog article, I encourage you to do so. In this article, we’ll shift... read moreAuthor: Nathanael Wright | Last Updated: 10/18/2022 | Comments: 3
Setting up software on multiple computers can be a chore. If you need to install the Device Configuration Utility (DevConfig) on several desktop computers or service laptops, the unattended or silent install process may make it significantly quicker and easier. This article covers the simple... read moreAuthor: Dirk Baker | Last Updated: 06/21/2021 | Comments: 6
In this article, I'll share my experience collaborating on a research project to record some extreme weather conditions that may even set a world record! On August 16, 2020, the weather station located at Furnace Creek in Death Valley National Park (California, USA) recorded a temperature... read moreAuthor: Dana Worley | Last Updated: 07/19/2017 | Comments: 0
In an April 2016 blog article (“Handling New Device Drivers in a Changing Windows World”), I wrote that Campbell Scientific was ending Windows XP support for our hardware device drivers. In that article, I also mentioned that Windows XP support might end for other products... read moreAuthor: Travis McKissack | Last Updated: 07/21/2016 | Comments: 0
When it comes to designing an RF (radio frequency) telemetry link, many people know that you need to ensure that there is an unobstructed line-of-sight (LOS) between the transmitting and receiving antennas. Unfortunately, many people don’t know that there is more to this seemingly obvious... read moreAuthor: Dana Worley | Last Updated: 04/27/2016 | Comments: 0
We've all been there. You open the box for some new toy such as a camera, printer, or even a data logger, and before you can get started, you are required to install a device driver. The device driver loads files onto your computer so... read moreAuthor: Sam Utley | Last Updated: 03/30/2016 | Comments: 4
While you may have no problem identifying which standard polarity RF connectors are pin (male) or socket (female), do you find it difficult to identify the gender of reverse polarity connectors? If so, don’t worry. You are certainly not alone. In addition to the gender... read more