Displaying 1 - 6 of 6 articles tagged with: Modbus
著者： Jacob Davis | 最終更新日: 02/28/2018 | コメント: 1
Now and then, someone will ask if a Campbell Scientific data logger can be used in place of a PLC (programmable logic controller) or an RTU (remote terminal unit). Admittedly, it is not a simple question to answer. The capabilities of modern PLCs, RTUs, and...
続きを読む
著者： Paul Smart | 最終更新日: 03/08/2017 | コメント: 6
Have you ever set up a Campbell Scientific data logger as a Modbus server and discovered that your data was not arriving at your SCADA system as you expected? You may have quickly realized two things: troubleshooting the communication problem is not an easy task,...
続きを読む
著者： Paul Smart | 最終更新日: 04/07/2016 | コメント: 24
Did you know that you can turn your Campbell Scientific data logger into a Modbus TCP/IP server? Do you know why that’s a good idea? Campbell Scientific data loggers are commonly used as Modbus server devices. This means that the data logger is configured to...
続きを読む
著者： Robin Deissinger | 最終更新日: 03/16/2016 | コメント: 3
In this short interview, Kevin Rhodes, the product manager for the new CR300, tells us how this new data logger will be helpful to Campbell Scientific customers and why he thinks the CR300 is a great value. Kevin is the Director of Product Management at...
続きを読む
著者： Paul Smart | 最終更新日: 01/20/2016 | コメント: 0
Have you heard of DNP3 but been unsure of what it is or what it’s used for? In this brief article, I’ll introduce you to this communications protocol, its role in SCADA applications, and how you can use it with your Campbell Scientific equipment and...
続きを読む
著者： Paul Smart | 最終更新日: 09/02/2015 | コメント: 2
You may have heard of Modbus (a widely used communications protocol), but do you know why it is often used with Campbell Scientific data loggers? Do you know how to use Modbus for communication between your data loggers and other Modbus-capable devices? Modbus is just one...
続きを読む
