This product is no longer available and has been replaced by: CM256.
| 利用できるサービス | |
|---|---|
| 修理 | 非対応 |
| キャリブレーション | 非対応 |
| フリーサポート | 非対応 |
概要
The process of securely mounting and accurately leveling a pyranometer to a mounting bracket has traditionally been very difficult. The balance between tightly securing the sensor to the mounting bracket while perfectly leveling the sensor requires great time, skill, and fortitude. Without a secure fit, the sensor’s position will shift, and the sensor’s level will potentially be lost. The process is made even more difficult when the sensor is to be mounted on a tilt to enable plane of array measurement. It is nearly impossible to assure the sensor is both level to the plane and in the perfect azimuth. The CM255LS solves both of these problems.
The CM255LS is an adjustable-angle, adjustable-plane mounting stand. The installation technician can now securely bolt the sensor to the mount. Then, using the sensor’s bubble level as a reference, the technician levels the plane of the mount by adjusting the built-in leveling bolts. Next, because of the overlapping design between the two components of the bracket, as the mount is pivoted, or tilted, the correct azimuth is maintained─assuming the crossarm is properly installed with a north-south orientation. Our most experienced VAR designed an ingenious diopter that temporarily mounts on the crossarm that is used in combination with real-time solar position data obtained from a Campbell Scientific data logger to orient the crossarm perfectly to the sun’s position.
イメージ
仕様
| Why/When to Use | Designed for applications that need the sensor to be both level to the plane and in the perfect azimuth. |
| Dimensions | 15.24 x 15.875 x 10.16 cm (6 x 6.25 x 4 in.) |
| Weight | 657.7 g (1.45 lb) |
互換性
注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
Sensors
| 製品 | 互換性 | 注意 |
|---|---|---|
| CMP11-L (リタイア) | Assumes the CMP11 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CMP21-L | Assumes the CMP21 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CMP3-L | ||
| CMP6-L (リタイア) | Assumes the CMP6 is not housed in the CVF4 Heater/Ventilation Unit. | |
| CS300-L (リタイア) | Requires the 18356 Leveling Base. | |
| LI190SB-L (リタイア) | Requires the LI2003S Leveling Base. | |
| LI200S-L (リタイア) | Requires the LI2003S Leveling Base. | |
| LI200X-L (リタイア) | Requires the LI2003S Leveling Base. | |
| SR20-T2-L (リタイア) | Assumes the SR20-T2-L is not housed in the VU01 Heater/Ventilation Unit. |
互換性に関する追加情報
The saddle bracket fits 2.54 cm (1 in.) pipe with a diameter of 3.34 cm (1.315 in.).
Sensors
The CM255LS is NOT compatible with rotating shadowband radiometers (RSRs).
記事とプレスリリース
以下に記載
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する