The 14201 is a high-gain (9 dBd), directional (Yagi) antenna. It is useful for making RF links over longer distances in one direction. This antenna is typically used with sub-315 mW radios such as the RF401A. The 14201 requires an antenna cable to connect it to the spread-spectrum transceiver. (See the Compatibility information for cable options.)
続きを読むThe 14201 is a high-gain, Yagi antenna used with our 900 MHz spread spectrum transceivers. This outdoor antenna has a narrow beam width that requires precise aiming. It should be used to communicate with one distant station. The 14201 requires an antenna cable to connect it to the spread spectrum transceiver. (See the Compatibility information for cable options.)
Note: Because the FCC limits the EIRP of 900 MHz spread-spectrum radios to 36 dBm, using this antenna with an RF450- or RF451-based system requires the user to reduce the radio's transmit power to a setting of 5 or less.
Gain | 9 dBd |
Frequency Band Supported | 900 MHz |
Connector | Type N female |
Antenna Type | Yagi (directional) with mounting hardware |
Manufacturer's Model Name | MAXRAD BMOY8905 |
Mounting | Mounts to pipes with outer diameters from 3.18 to 6.35 cm (1.25 to 2.5 in.) |
Bracket Dimensions | 11.5 x 9 x 0.6 cm (4.5 x 3.5 x 0.25 in.) |
Overall Length | 56.5 cm (22.3 in.) |
Longest Element Length | 16 cm (6.3 in.) |
Weight | 0.73 kg (1.6 lb) |
注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
製品 | 互換性 | 注意 |
---|---|---|
CR205 (リタイア) | ||
CR206 (リタイア) | ||
CR206X (リタイア) | ||
CR210 (リタイア) | ||
CR211 (リタイア) | ||
CR211X (リタイア) | ||
CR6 | Compatible with the -RF451, -RF407, and -RF412 options. | |
CRVW3 | Compatible with the -RF451, -RF407, and -RF412 options. |
製品 | 互換性 | 注意 |
---|---|---|
FGR-115RC (リタイア) | ||
FGR-115RE (リタイア) | ||
RF400 (リタイア) | ||
RF401 (リタイア) | ||
RF401A | ||
RF407 | ||
RF410 (リタイア) | ||
RF411 (リタイア) | ||
RF411A | ||
RF412 | ||
RF422 | ||
RF430 (リタイア) | ||
RF431 (リタイア) | ||
RF450 (リタイア) | ||
RF451 (リタイア) | ||
RF452 |
Note: Because the FCC limits the EIRP of 900 MHz spread-spectrum radios to 36 dBm, using this antenna with an RF450- or RF451-based system requires the user to reduce the radio's transmit power to a setting of 5 or less.
The following cables can be used:
The antenna includes mounting hardware that accommodates a pipe of up to 3.18 to 6.35 cm (1.25 to 2.5 in.) outer diameter.
We've updated our privacy policy. 詳細はこちら
Update your cookie preferences. クッキーの設定を更新する