RETIRED ›
This product is no longer available.
SDM8X50 8-Channel 50 Ohm Coaxial Multiplexer for TDR Systems
利用できるサービス

概要

The SDM8X50 is a 50 ohm, coaxial, 8:1 multiplexer used in a Campbell Scientific time-domain reflectometer system. It consists of a surge-protected multiplexer circuit board enclosed in a metal housing and a separate strain-relief bracket for the coaxial cables. Both the multiplexer housing and strain relief bracket have holes drilled at a 1 in. spacing. This enables you to mount the SDM8X50 to a wall or attach it to the backplate of a user-supplied enclosure or Campbell Scientific enclosure.

When you purchase the SDM8X50 with the –E option, a 10 x 12 x 4.5 in. environmental enclosure and enclosure supply kit are included. Other compatible Campbell Scientific enclosures that you may purchase separately include the ENCTDR100, ENC12/14, ENC14/16, and ENC16/18

利点と特徴

  • Longer lasting relays; 20 times more operations than SDMX50 relays
  • Non-latching relays provide better surge protection
  • Hermetically sealed relays are more stable and do not become coated with a non-conducting film
  • Quiet operation

イメージ

SDM8X50 (strain relief bracket not shown)
SDM8X50 (strain relief bracket not shown)
SDM8X50 (strain relief bracket not shown)
SDM8X50 (strain relief bracket not shown)
SDM8X50 (strain relief bracket not shown)
SDM8X50 in an ENCTDR100 enclosure with the TDR200, CR1000, and PS150

仕様

Operating Temperature Range -40° to +55°C
Multiplexer Housing Dimensions 24.9 x 12.2 x 4.6 cm (9.8 x 4.8 x 1.8 in.) with mounts
Strain Relief Bracket Dimensions 20.3 x 4.3 x 1.3 cm (8.0 x 1.7 x 0.5 in.)
Multiplexer Weight 590 g (1.3 lb)

Power Requirements

Input Power 12 Vdc
Quiescent Current Drain < 1 mA
Current Drain during Switching ~ 90 mA (All multiplexers of the same level switch simultaneously for less than 1 s.)
Relay Contact Life Expectancy 100 x 106 operations (at 5 V and 10 mA)

Enclosure (-E option)

Outside Dimensions 40.4 x 29.2 x 17.5 cm 15.9 x 11.5 x 6.9 in.) with mounts
Inside Dimensions 25.4 x 30.4 x 11.4 cm (10 x 12 x 4.5 in.)
Weight 4.1 kg (9.0 lb)

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Data Loggers

製品 互換性 注意
21X (リタイア) Although compatible with the SDM8X50, this data logger is not compatible with the TDR100.
CR10 (リタイア) Although compatible with the SDM8X50, this data logger is not compatible with the TDR100.
CR1000 (リタイア)
CR1000X (リタイア)
CR10X (リタイア)
CR23X (リタイア)
CR3000 (リタイア)
CR6
CR800 (リタイア)
CR850 (リタイア)

Mounting Equipment

製品 互換性 注意
ENC12/14
ENC14/16
ENC16/18
ENCTDR100

互換性に関する追加情報

Enclosure Considerations

When purchased with the –E option, a 10 x 12 x 4.5 in. environmental enclosure and enclosure supply kit are included with the SDM8X50.


よくある質問

SDM8X50に関するよくある質問の数: 2

  1. The hermetically sealed relays used in the SDM8X50 are much quieter than the relays used with the retired SDMX50-series multiplexers. Although listening for the clicking on the SDMX50-series multiplexers was a common method to verify that the multiplexer was powered and communicating with the data logger, that test does not work for the SDM8X50.

  2. The SDM8X50 is the same as the SDMX50SP in form, fit, and function. When purchased with the –E enclosure option, a 10 x 12 in. environmental enclosure is included, making it functionally the same as the SDMX50. There is no comparable replacement for the SDMX50LP, which was the multiplexer and backplate used with the SDMX50 but sold separately for installation in a user-supplied enclosure.

    The primary difference between the SDM8X50 and the SDMX50-series multiplexers is the electromechanical relays. The SDMX50-series products used latching relays with an expected lifespan of 5 x 106 operations. Because these relays were always latched, there was always an electrical pathway back to the TDR100 and an increased risk of damage from an electrical surge. The SDM8X50 uses non-latching, hermetically sealed relays with a lifespan of 100 x 106 operations. Additionally, relays have been added to the ground channels to electrically isolate them from each other and reduce interference. Thus, the SDM8X50 has improved surge protection, quieter operation, and a longer lifespan than the SDMX50-series multiplexers.


記事とプレスリリース

ニュースレター記事


以下に記載

下記製品の共通アクセサリです:
下記の製品は置き換えられました

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する