高度な信号処理による雲の測定
概要
利点と特徴
- 高いS/N比と検出感度を最大化するシングルレンズ設計により、低高度から高高度まで高いパフォーマンスを発揮
- 高性能とハイスペックを低価格で実現
- 24°までの傾斜角度により、降雨時の性能を向上させ、太陽光の眩しさの影響を軽減
- 2つの独立した内部クォーツクロックのユニークな連続比較により、測定の信頼性を確保
- 大気質アプリケーション用の混合層高さ評価オプション
- ユーザーフレンドリーな成層雲校正機能と、フィールド校正を容易にする校正板を標準装備した簡単なテスト
イメージ
詳細
データの視覚化と解釈のためのソフトウェア
シーロメータのデータは、Campbell の Viewpoint ソフトウェアを使用して表示することも、既存のデータシステムに直接取り込むこともできます。Campbell Viewpoint ソフトウェアは、空の状態、混合層、散乱プロファイルなどの情報を含む、シーロメータからの出力を便利で設定可能な形式で表示します。すべてを同時に表示することも、範囲と時間スケールで個別に表示することもできます。Viewpoint の詳細については、こちらをクリックしてください。
仕様
| 寸法 | 100 x 32.7 x 28.1 cm (39.4 x 12.9 x 11.1 in.) ベース含む |
| 配送寸法 | 120 x 45.0 x 45.0 cm (47.2 x 17.7 x 17.7 in.) |
| 重さ | 32 kg (71 lb) ケーブル除く |
| 発送重量 | 58 kg (127.9 lb) |
機器性能 |
|
| 報告範囲 | 0 ~ 10 km (0 ~ 33,000 ft) |
| 最小報告解像度 | 5 m (16.4 ft) |
| ハードターゲット距離精度 | ±0.25%, ±4.6 m (15.1 ft) |
| 報告サイクル | 2 ~ 600 秒 |
| 報告された雲層 | 最大4層 |
| 空の状態 | SYNOPおよびMETARコードのWMO要件に準拠したオクタ単位カバーで最大5層まで標準装備 |
| 垂直方向の可視性 | 雲が選択されていない場合に報告される |
| レーザー波長 | 912 nm (±5 nm) |
| 目の安全基準 | クラス 1M |
電気仕様 |
|
| 電源 | 110, 115, 230 Vac ±10%, 50 ~ 60 Hz, 470 W 最大 |
| バッテリ |
内部 12 Vdc、2 Ah バッテリーバックアップ 主電源障害時には、送風機/ヒーターなしで 2 時間の測定を提供します |
| インターフェース |
|
| レーザー安全コンプライアンス | EN60825-1:2001 |
| 電気安全コンプライアンス | EN61010-1 |
環境仕様 |
|
| 温度範囲 |
|
| 湿度範囲 | 0 ~ 100% RH |
| 最大風速 | 55 m/s (123 mph) |
| IP 等級 | IP66 (NEMA 4x) |
動画とチュートリアル
ダウンロード
SkyVue Example Programs v.1 (3 KB) 07-11-2019
CRBasic data logger programs for use with CS message 1. One example includes a cyclic redundancy check (CRC).
Please contact support for help with programming to read other message types.
SkyVue PRO-CS135-OS v.14 (429kb) 11-12-2019
Campbell Scientific has introduced a new operating system, OS14 for the SkyVue PRO and CS135 ceilometer. It is fully backwards compatible. OS14 is available free of charge and can be downloaded from the Campbell Scientific website or supplied by email on request.
Upgrade to OS14 is recommended.
Improvements
OS14 has introduced improvements to overlap functions, cloud detection filters and thresholds to reduce false cloud detection at low and medium heights notably to about 1,000m.
OS14 has increased low level vertical visibility performance and stability particularly from the ground to 50m.
An option “cloudMode A“ has been added to only report the highest cloud seen during precipitation events. This has been added to further minimise the reporting of rain as low cloud.
OS14 has a new command “application n”, which allows the user to select the recommended, optimum settings for specific applications, including Aviation, Research, Air Quality and Meteorology. In addition, you can specify you own user defaults or select the original default settings for all settings as defined in earlier operating systems. OS14 is pre-configured for Meteorological use in newly purchased SkyVue PRO sensors or when OS14 is loaded onto a SkyVue PRO or CS135 running earlier operating systems. Individual user settings remain adjustable for further optimisation by the user and for use in other applications.
There is a new option to allow the user to select whether backscatter rolling averages are calculated as mean or median values. The median option is new and is more effective at removing transient signals caused by birds and insects. A new parameter has been added in the BS command to permit users to select either option. Other commands affected include “getuser” and “setuser”.
A “mainsFail” flag has been added to the output messages to indicate failure of mains power whilst operating on the backup battery.
OS14 has introduced a global ID (address) of “99” to permit users to connect to the instrument over a serial connection, if the ID is unknown.
A command “loados” has been added to make it easier to load a full new operating system. The selection of specific individual board operating systems, DSP, TOP and PSU, can still be performed and “loados 4” will continue to function, as in previous OS versions.
OS14 now has a wider range of height offsets to allow greater correction of the height of the sensor than previous OS versions.
Fixes
OS14 includes changes to Sky Condition to improve weighted average cloud heights and prevent the small possibility for arithmetic overflow which may result in a spurious layer being reported.
OS14 also includes improved backscatter filtering to reduce the possibility of noise banding when observed with Viewpoint
OS14 supersedes OS13 which had the above features and includes further optimised control of the dirty windows LED.
Campbell Viewpoint v.2.1.0.2 (86 MB) 09-10-2019
Campbell Viewpoint is viewing software designed to accompany the Campbell Scientific optical sensor range, including the CS135 ceilometer, SkyVue PRO, SkyVue 8, SkyVue 8M, CS120A visibility and CS125 present weather sensors. It is free to download (or via email on request) and use for 100 hours, after which you will need to purchase a key to continue using it.
Version 2.1.0.2
Viewpoint version 2.1.0.2 has introduced our new ceilometer sensors to the list of instruments that can be monitored. This includes the SkyVue PRO, SkyVue 8 and SkyVue 8M.
Previous sensors are still available.
Version 2.1.0.2 also includes some minor bug fixes and improvements to the help menu.
よくある質問
SkyVue PROに関するよくある質問の数： 1
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する