41303-5A 6-Plate Solar Radiation Shield

見積もり依頼をするご質問はこちらご質問はこちら

Provides More-Accurate Measurements
Shades and protects sensor

イメージ
類似製品
詳細
仕様
互換性
よくある質問
記事
関連

概要

The 41303-5A, manufactured by R. M. Young Company, is a naturally aspirated, 6-plate radiation shield. Its louvered construction allows air to pass freely through the shield, serving to keep the probe at or near ambient temperature. The shield's white color reflects solar radiation.

利点と特徴

Naturally shades and protects the sensor
Mounts directly to Campbell Scientific tripods and towers
Used with HMP60, CS215, 107, 108, 109, HMP50, or CS500 probes

イメージ

41303-5A mounted vertically

類似製品

41303-5B 6-Plate Solar Radiation Shield with 2 IPS Band Clamp

41003-5 10-Plate Solar Radiation Shield

41005-5 14-Plate Solar Radiation Shield for the HMP155A

43502-L Compact Aspirated Shield

詳細

The 41303-5A houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held into place with screws.

The 41303-5A includes a 2-in. u-bolt with a plastic v-block. The u-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The u-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.

The 41303-5A replaced the 41301 in 2005. The biggest improvement of the 41301 is that it can be mounted to either a vertical pole or horizontal pipe. The retired 41301 only mounted to a vertical pole.

仕様

Construction	UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp
Plate Diameter	11.9 cm (4.7 in.)
Height	11.4 cm (4.5 in.)
Weight	408 g (0.9 lb)

互換性

注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Sensors

製品	互換性	注意
107
108
109
43347-L
CS215-L (リタイア)
CS500-L (リタイア)
HC2S3-L (リタイア)
HMP155A-L
HMP35A (リタイア)
HMP35C-L (リタイア)
HMP45C-L (リタイア)
HMP50-L (リタイア)
HMP60-L

互換性に関する追加情報

The 41303-5A attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.

よくある質問

41303-5Aに関するよくある質問の数： 2

Which radiation shield model should be used with the HC2S3-L?

To measure ambient temperature and relative humidity (RH), mount the HC2S3-L probe inside a 41003-5 or 41003-5A 10-Plate Radiation Shield. The 27731 hex plug is shipped with the HC2S3-L so that it can be used with older 10-plate radiation shield models. The 6-plate radiation shield (pn 41303-5A) cannot be used with the HC2S3-L.
Can the 41303-5A 6-plate radiation shield or the 41003-5 10-plate radiation shield be used with the HMP155A-L?

No. The HMP155A-L requires the 41005-5 14-Plate Solar Radiation Shield.