温湿度センサ / CS500-L
RETIRED ›
This product is no longer available and has been replaced by: CS215-L,HMP60-L.
CS500-L Temperature and Relative Humidity Probe
利用できるサービス
修理 非対応
キャリブレーション 非対応
フリーサポート 非対応

概要

The CS500 was a modified version of Vaisala's 50Y Humitter. The probe measured temperature with a 1000 Ohm platinum resistance thermometer (PRT) and relative humidity (RH) with a 50Y Intercap humidity sensor. The CS500 was cabled with our pn 9720 cable.

イメージ

仕様

Accuracy
  • ±3% (over 10 to 90% RH)
  • ±6% (over 90 to 100% RH)
Operating Temperature Range -40° to +60°C
Diameter 1.2 cm (0.47 in.)
Length 6.75 cm (2.66 in.)
Weight 0.05 kg (0.1 lb) with 1.83-m (6-ft) cable

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Data Loggers

製品 互換性 注意
21X (リタイア)
CR10 (リタイア)
CR1000 (リタイア)
CR10X (リタイア)
CR200X (リタイア)
CR206X (リタイア)
CR211X (リタイア)
CR216X (リタイア)
CR23X (リタイア)
CR295X (リタイア)
CR3000 (リタイア)
CR500 (リタイア)
CR5000 (リタイア)
CR510 (リタイア)
CR800 (リタイア)
CR850 (リタイア)
CR9000 (リタイア)
CR9000X (リタイア)

互換性に関する追加情報

Mounting

The CS500 is typically housed in a 41303-5A 6-plate naturally aspirated shield.

It may also be housed in a 41003-5 10-plate shield if additional hardware is used. A 41322 Adapter Plate allows the HMP50 to be mounted in the lower part of the 41003-5 10-plate shield. Alternatively, a 41381 extension tube and the 6637 split nut plug can be used to mount the CS500 in a higher part of the 41003-5; the pn 41381 cable is also required.

Both the 41303-5A and the 41003-5 attach to a crossarm, mast, or user-supplied pipe with a 1.0-in. to 2.1-in. outer diameter.

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する