RETIRED ›
This product is no longer available and has been replaced by: CM221.
CM220 Right-Angle Mounting Kit
利用できるサービス
フリーサポート 対応

概要

The CM220 right-angle mounting bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a crossarm. It is compatible with pipes that have a 1- to 1.5-inch outer diameter. (For more information, refer to the Compatibility information.) The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 Nu-Rail Offset Crossover fitting.

続きを読む

イメージ

CM220 kit
CM220 kit
CM220 kit
CM220 kit attached to a crossarm (sold separately)
CM220 kit attached to a crossarm, pole, and 03002-L (items sold separately)

CAD ファイル:

詳細

The CM220 consists of a rectangular bracket and two 1.5 in. U-bolts.

The CM220 Right-Angle Mounting Bracket can attach a sensor with a vertical pipe mount (e.g., most wind sensors) to a CM202, CM204, or CM206 crossarm. It is compatible with pipes that have a 1.0" to 1.5" outer diameter.

The CM220 is creased during manufacture to allow pipes of varying diameters to seat snugly into the bracket. The 90° bend in the middle of the bracket allows the CM220 to fill roughly the same role as the 1049 or 17953 NU-RAIL Offset Crossover fitting.

仕様

U-bolt and Washer Material 304 stainless steel (not passivated)
Bracket Material 12 gage, 304 stainless steel (not passivated)
Dimensions 5.74 x 5.74 x 7.62 cm (2.25 x 2.25 x 3 in.)
Weight 0.29 kg (0.65 lb)

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Sensors

製品 互換性 注意
014A-L
03002-L
034B-L
05103-45-L (リタイア)
05103-L
05106-L (リタイア)
05305-L
27106T-L
52202-L
CSAT3 (リタイア)
SI-111 (リタイア)
SR50A-L (リタイア)
WINDSONIC-L (リタイア)
WXT520 (リタイア)

Mounting Equipment

製品 互換性 注意
CM202
CM202SS
CM203
CM204
CM204SS
CM206

互換性に関する追加情報

Sensors

The CM220 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.

Pipe

The CM220 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).

Peripherals

The CM220 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.

以下に記載

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する