This product is no longer available.
| 利用できるサービス | |
|---|---|
| 修理 | 非対応 |
| キャリブレーション | 非対応 |
| フリーサポート | 非対応 |
概要
For EUMETSAT Meteosat communications, please use the TX320 High Data Rate GOES Transmitter.
Campbell Scientific no longer sells the OMNISAT-M as a standard product. If you require the use of the Signal Engineering OmniSat transmitter, contact an application engineer at Campbell Scientific for more information.
The OMNISAT-M is a satellite transmitter that uses the METEOSAT satellite system to provide one-way communications from a data collection platform (DCP) to a receiving station.
Meteosat is a system of geostationary meteorological satellites operated by EUMETSAT (European Organisation for the Exploitation of Meteorological Satellites). Geostationary satellites have orbits that coincide with the Earth's rotation, allowing each satellite to remain above a specific region. EUMETSAT is an intergovernmental organization created through an international convention of European countries.
続きを読むイメージ
詳細
The OMNISAT-M transmitter uses the METEOSAT satellite system to provide one-way communications from a data collection platform (DCP) to a receiving station. Supported transmission rates are 300 and 1200 bps. This transmitter is used with our CR800, CR850, CR1000, and CR3000 dataloggers.
Because clock accuracy is critically important for METEOSAT satellite telemetry, the OMNISAT-N includes an embedded GPS receiver. The GPS receiver automatically corrects for clock and oscillator drift.
METEOSAT System
Meteosat is a system of geostationary meteorological satellites operated by EUMETSAT (European Organization for the Exploitation of Meteorological Satellites). Geostationary satellites have orbits that coincide with the Earth's rotation, allowing each satellite to remain above a specific region. EUMETSAT is an intergovernmental organization created through an international convention of European countries.
仕様
| Dimensions | 16.5 x 12.2 x 3.8 cm (6.5 x 4.8 x 1.5 in.) |
| Weight | 59.5 g (2.1 oz) |
互換性
注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
Data Loggers
| 製品 | 互換性 | 注意 |
|---|---|---|
| CR1000 (リタイア) | ||
| CR200X (リタイア) | ||
| CR206X (リタイア) | ||
| CR211X (リタイア) | ||
| CR216X (リタイア) | ||
| CR295X (リタイア) | ||
| CR3000 (リタイア) | ||
| CR5000 (リタイア) | ||
| CR800 (リタイア) | ||
| CR850 (リタイア) | ||
| CR9000X (リタイア) |
互換性に関する追加情報
Environmental Enclosure
The transmitter should be housed in an ENC16/18 environmental enclosure. Customers can order the 19332 and 19336 Antenna Cable/Bulkhead accessories to have Campbell Scientific punch a special bulkhead hole in the enclosure and install 17” cables for the Yagi and GPS antennas.
Power Supply
Typical power supply is a BP24 24 Ahr battery, a CH100 regulator, and an SP20 solar panel. A user-supplied deep-cycle rechargeable battery should be used when it is difficult to replace the batteries or the system's power requirements are large. The deep-cycle rechargeable battery should have at least a 60-Ahr capacity, and be trickle-charged with a 20-W solar panel.
よくある質問
OMNISAT-Mに関するよくある質問の数： 1
-
To connect a data logger to an OMNISAT-M, use the RS-232 port of the data logger. Connection using the CS I/O port of the data logger will not be successful.
関連リンク
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する