SnowVue 10 Digital Snow-Depth Sensor
High Sensitivity and Low Noise
For best-in-class performance
weather applications water applications energy applications gas flux and turbulence applications infrastructure applications soil applications

Overview

The SnowVue™10 is a digital, ultrasonic snow-depth sensor that provides continuous and accurate snow-depth measurements with its advanced spectrum analysis and best-in-class, wide-band transducer. With its low-power requirement and low-maintenance design, the SnowVue 10 is suitable for most alpine and remote installations. The SnowVue 10 also features Campbell Scientific’s total uptime diagnostic package to provide you with critical sensor performance measurements such as internal humidity, temperature, sensor level (tilt), measurement quality, and incoming voltage. An external air temperature sensor is required to correct for the changes in sound velocity due to changes in temperature.

Read More

Benefits and Features

  • Snow-depth measurements with low noise and high precision
  • Low power usage for remote solar applications
  • Exceptional reliability with advanced diagnostics
  • SDI-12 v.1.4 output compatible with current Campbell Scientific data loggers

Images

Detailed Description

The SnowVue 10 uses a wide-band, ultrasonic transducer to create sound pulses that are reflected off the snow surface. By measuring the two-way travel time of the pulse, the distance to the snow surface can be precisely calculated using advanced spectrum analysis. Because the speed of sound through air varies with the air temperature, an accurate air temperature measurement is required to correct for this change.

Aspen 10-Compatible IoT Solution

The SnowVue 10 can be paired with the Aspen™10 Internet of Things (IoT) Edge Device. To get next-gen IoT solutions for advanced meteorological monitoring, click the image below:

SnowVue 10 + Aspen 10 Solutions

Specifications

Power Requirements 9 to 18 Vdc
Quiescent Current Consumption < 300 µA
Active Current Consumption
  • 210 mA (peak)
  • 14 mA (average at 20°C)
Measurement Time
  • 5 s (typical)
  • 20 s (maximum)
Warm-Up Time 2 s
Output SDI-12 (version 1.4)
Measurement Range 0.4 to 10 m (1.3 to 32.8 ft) distance from sensor
Snow Depth 0 to 9.6 m (0 to 31.5 ft)
Accuracy
  • Accuracy specification is for still air with uniform temperature between the sensor and a flat, solid target. Air movement, temperature gradient along the sonic path, snow density, and differences between actual and measured temperature can affect the accuracy. An external temperature compensation is required.
  • 0.2% of distance to target
Resolution 0.1 mm
Required Beam Angle Clearance 30°
Operating Temperature Range -45° to +50°C
Survivability Temperature Range -55° to +80°C (will resume normal operation when sensor returns to operational temperatures)
Humidity Range 0 to 100% (non-condensing)
Sensor Body Material Corrosion-resistant, type III anodized aluminum
Sensor Connector M12, male, 4-pole, A-coded
Cable Type Polyurethane sheathed, screened cable
Cable Diameter 4.8 mm (0.19 in.)
Maximum Cable Length 60 m (197 ft)
Sensor Length 9.9 cm (3.9 in.)
Sensor Weight 293 g (0.65 lb)

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
Aspen 10
CR1000X
CR300
CR3000 (retired)
CR310
CR350
CR6
CR800 (retired)
CR850 (retired)

Additional Compatibility Information

The SnowVue 10 is compatible with all current Campbell Scientific data loggers and retired data loggers that support the SDI-12 protocol.

Downloads

SnowVue 10 OS v.1.19 (472 KB) 08-02-2024

Current SnowVue 10 operating system. 

Note: OS update must be performed using the aXLOADOS! SDI-12 command. Please refer to the SnowVue user manual for details on the update process. 

View Update History

SnowVue Program Example for GRANITE-Series, CR6, CR1000X Dataloggers v.1 (10 KB) 03-11-2021

Two programs that read the SnowVue 10 sensor. One program performs temperature compensation to provide snow depth. The other program uses extended commands to send the air temperature and distance to ground to the sensor and the sensor calculates the snow depth. Both example programs are compatible with the GRANITE-series, CR6, and CR1000X dataloggers.

SnowVue 10 Patch for Short Cut v4.4 v.1.0 (3.10 MB) 25-10-2022

This patch adds SnowVue 10 support to ShortCut version 4.4.

This Product Replaced

Privacy Policy Update

We've updated our privacy policy.  Learn More

Cookie Consent

Update your cookie preferences.  Update Cookie Preferences