A547 Conductivity Interface for CS547(A)
Helps Measure a Water Conductivity Probe
気象 applications 水 applications エネルギー applications ガスフラックスと乱流 applications インフラ applications 土壌 applications

概要

The A547 is an interface that allows your Campbell Scientific data logger to measure a CS547A water conductivity probe. The A547 Conductivity Interface contains the blocking capacitors and bridge completion resistors necessary for the conductivity measurement. One A547 is required for each CS547A when used directly with the data logger; multiple CS547A probes can be used with an AM16/32B multiplexer and one A547.

続きを読む

利点と特徴

  • Compatible with AM16/32-series multiplexers, allowing measurement of multiple sensors

イメージ

詳細

The A547 interface consists of blocking capacitors and bridge completion resistors housed in a metal case. Screw terminals are provided for connecting the data logger, and a water conductivity probe or multiplexer.

仕様

Operating Temperature -15° to +50°C
Dimensions
  • 6.4 x 4.6 x 2.3 cm (2.5 x 1.8 x 0.9 in.)
  • 8.9 x 4.6 x 2.3 cm (3.5 x 1.8 x 0.9 in.) with mounts
Weight 45 g (2 oz)

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Data Loggers

製品 互換性 注意
21X (リタイア)
CR10 (リタイア)
CR1000 (リタイア)
CR10X (リタイア)
CR200X (リタイア)
CR206X (リタイア)
CR211X (リタイア)
CR216X (リタイア)
CR23X (リタイア)
CR295X (リタイア)
CR3000 (リタイア)
CR500 (リタイア)
CR5000 (リタイア)
CR510 (リタイア)
CR800 (リタイア)
CR850 (リタイア)
CR9000 (リタイア)
CR9000X (リタイア)

Sensors

製品 互換性 注意
CS547A-L
CS547-L (リタイア)

互換性に関する追加情報

Data Logger Considerations

Measurement of the CS547(A) via the A547 requires two excitation channels, a differential input for the conductivity measurement, and a single-ended input for the temperature measurement.

Multiplexers

The A547 is compatible with AM16/32-series multiplexers. When a multiplexer is used, the sensors connect to the COM terminals of the multiplexer and the multiplexer connects to the sensor terminals of the A547.

Cabling

Data Logger-to-A547

A six-conductor cable, three feet in length, is provided with each A547 purchase for connecting it to the data logger.

A547-to-Sensor(s)

In single-sensor applications, the sensor leads connect directly to the A547's terminal strips. In applications with multiple sensors, most customers multiplex the sensors through a multiplexer. In this case, a shielded 4-conductor cable is used to connect the sensor terminals on the A547 with the COM terminals on the multiplexer. 

Enclosures

The A547 requires a desiccated, non-condensing environment. The A547's case has mounting flanges for attachment to the 1"-on-center hole grid of Campbell Scientific enclosures. Grommets and screws are provided to attach the flanges to the backplate of our enclosures.


以下に記載

下記製品のその他アクセサリです:
下記製品の共通アクセサリです:

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する