This product is no longer available and has been replaced by: LOGGERLINK.
| 利用できるサービス | |
|---|---|
| 修理 | 非対応 |
| キャリブレーション | 非対応 |
| フリーサポート | 非対応 |
概要
Current Version: 2.33
The PCONNECTCE/U upgrade is for customers who have previously purchased PConnectCE software.
The PDA-to-RS232 cable (available as of the 2.0 version) is included in the upgrade. Inclusion of the connector allows a customer who purchases an upgrade from 1.X to 2.0 to have all of the items that are included in a full PConnect (non-upgrade) 2.0 package.
続きを読む利点と特徴
- Upgrade from older version to current version for a discounted price
イメージ
詳細
PConnectCE/U upgrades PConnectCE 1.x to version 2.33.
The PDA-to-CS I/O connector is NOT included; however, the PDA-to-RS232 cable (available as of the 2.0 version) is included in the upgrade. Inclusion of the connector allows a customer who purchases an upgrade from 1.X to 2.x to have all of the items that are included in a full PConnectCE (non-upgrade) 2.x package.
Learn more about its capabilities on the PConnectCE product page.
仕様
| Current Version | 2.33 |
互換性
注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
Data Loggers
| 製品 | 互換性 | 注意 |
|---|---|---|
| 21X (リタイア) | ||
| CR10 (リタイア) | ||
| CR1000 (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR10X (リタイア) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
| CR200X (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR206X (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR211X (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR216X (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR23X (リタイア) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
| CR295X (リタイア) | The CR200X-series and CR1000 dataloggers require PConnectCE version 2.0 or higher. | |
| CR3000 (リタイア) | The CR3000 requires PConnectCE version 2.1 or higher. | |
| CR500 (リタイア) | ||
| CR5000 (リタイア) | ||
| CR510 (リタイア) | For the CR510, CR10X, and CR23X, support for both the mixed-array and PakBus® data logger operating systems is provided in PConnectCE version 2.0 or higher; prior versions only supported the mixed-array OS. | |
| CR800 (リタイア) | The CR800 and CR850 require PConnectCE version 2.2 or higher. | |
| CR850 (リタイア) | The CR800 and CR850 require PConnectCE version 2.2 or higher. | |
| CR9000 (リタイア) | ||
| CR9000X (リタイア) |
互換性に関する追加情報
Data Logger Considerations
Data Logger Interfacing
- PDA-to-CS I/O connector or PDA-to-RS232 cable.
--OR--
- SC-IRDA Infrared Interface connects to the CS I/O port (not compatible w/CR200(X)-series)
PDA Requirements
- Operating system: Microsoft Pocket PC or Windows Mobile
- Must be capable of serial communication
- If using the SC-IRDA, the PDA must have an IRDA port and an IR chip set compatible with the SC-IRDA.
- For Bluetooth communication, the handheld must be Bluetooth enabled.
- Pocket PCs or Mobile Handhelds Tested by Campbell Scientific
Communication Requirements
PDA Connection for Serial Communication
PDA-to-serial cable or cradle (one end of the cable/cradle must terminate in a 9-pin serial connector) is required. The cable/cradle connects to the PDA-to-CS I/O connector or PDA-to-RS232 cable via the 9-pin serial connector. This cable/cradle may be included with the PDA, or it may need to be purchased as a separate accessory from the PDA manufacturer or a third party supplier.
Bluetooth Communication
Third-party Bluetooth serial adapter is required. The interface and/or cables that are used to connect the adapter to the data logger will vary, depending upon whether the device acts like a DTE (computer) device or DCE (PDA) device. In some instances, this is evident by the pin-out of the adapter, but not always. A general rule is if the adapter has a 9-pin female connector, then the adapter is connected to the data logger using the PDA-to-CS I/O connector for the CS I/O port or the PDA-to-RS232 cable for the RS-232 port. If the adapter has a 9-pin male connector, then the adapter is connected to the data logger using an SC32B for the CS I/O port or it can be connected directly to the RS-232 port.
Software
- A compatible version of Microsoft ActiveSync installed on the PC
- One copy of PConnectCE software per handheld
以下に記載
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する