RETIRED ›
This product is no longer available and has been replaced by: RF500M.
RF315M RF Modem
利用できるサービス
修理 非対応
キャリブレーション 非対応
フリーサポート 非対応

概要

The RF315M provides the communication interface between a data logger and a 3400 series Dataradio transceiver.

続きを読む

イメージ

類似製品

詳細

The RF315M provides the communication interface between a data logger and a radio purchased directly from DRL. It's typically powered with the 5 Vdc provided by the data logger's CS I/O port. When used at a repeater site, the RF315M is powered by a PS100/A100 combination.

仕様

Dimensions 11.4 x 16.0 x 22.9 cm (4.5 x 6.3 x 9 in.)
Weight 0.2 kg (0.5 lb)

互換性

注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Data Loggers

製品 互換性 注意
21X (リタイア)
CR10 (リタイア)
CR1000 (リタイア)
CR10X (リタイア)
CR200X (リタイア)
CR206X (リタイア)
CR211X (リタイア)
CR216X (リタイア)
CR23X (リタイア)
CR295X (リタイア)
CR3000 (リタイア)
CR500 (リタイア)
CR5000 (リタイア)
CR510 (リタイア)
CR800 (リタイア)
CR850 (リタイア)
CR9000 (リタイア)
CR9000X (リタイア)

互換性に関する追加情報

The RF315M is used with radios purchased directly from DRL. Networks can contain a mixture of RF315M modems, RF500M modems, and RF500B base stations. If RF315M modems are used in a network containing RF500M modems or RF500B base stations, then the RF315M modems must use the -TD PROM; the data loggers must also support PakBus (e.g., CR10X-PB, CR1000).

The RF315M is not compatible with other radios, radio modems, or radio base stations (e.g., RF300, RF310, RF310M, RF310B, P50, RF95(A), RF232(A)).

Radios, Radio Modems, and Radio Base Stations

The RF315M is used with radios purchased directly from DRL. Networks can contain a mixture of RF315M modems, RF500M modems, and RF500B base stations. If RF315M modems are used in a network containing RF500M modems or RF500B base stations, then the RF315M modems must use the -TD PROM; the data loggers must also support PakBus (e.g., CR10X-PB, CR1000).

The RF315M is not compatible with other radios, radio modems, or radio base stations (e.g., RF300, RF310, RF310M, RF310B, P50, RF95(A), RF232(A)).

ドキュメント

テクニカルペーパー



よくある質問

RF315Mに関するよくある質問の数: 3

すべて展開すべて折りたたむ

  1. Usually, yes. Contact Campbell Scientific for a return material authorization number (RMA) and instructions for returning the unit for repair. Additional information is available on the Repair and Calibration page.

  2. No. The CR1000KD is designed specifically for use on the CS I/O port of the CR800, CR1000, and CR6 dataloggers. 

  3. If the RF modem has a CS I/O connector, then it should be compatible with the CR10X without the use of an SC932A. Ensure that the RF modem’s firmware is compatible with the CR10X firmware.

    Note: RF modems that are not sold by Campbell Scientific will only interface with a CR10X via an SC932A or an SC105. 

Privacy Policy Update

We've updated our privacy policy.  詳細はこちら

Cookie Consent

Update your cookie preferences.  クッキーの設定を更新する