利用できるサービス | |
---|---|
修理 | 非対応 |
キャリブレーション | 非対応 |
フリーサポート | 非対応 |
The SC932 connected an RS-232 modem to the 9-pin serial I/O port (CS I/O) of one of our data loggers. It had internal jumpers that allowed it to be configured for some custom uses, such as one-way data transfer; please consult the manual for details.
注意: 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
製品 | 互換性 | 注意 |
---|---|---|
21X (リタイア) | ||
CR10 (リタイア) | ||
CR1000 (リタイア) | ||
CR10X (リタイア) | ||
CR200 (リタイア) | ||
CR205 (リタイア) | ||
CR206 (リタイア) | ||
CR210 (リタイア) | ||
CR211 (リタイア) | ||
CR215 (リタイア) | ||
CR216 (リタイア) | ||
CR23X (リタイア) | ||
CR295 (リタイア) | ||
CR3000 (リタイア) | ||
CR500 (リタイア) | ||
CR5000 (リタイア) | ||
CR510 (リタイア) | ||
CR800 (リタイア) | ||
CR850 (リタイア) | ||
CR9000 (リタイア) | ||
CR9000X (リタイア) |
Examples of commonly connected modems include short haul modems, fiber optic modems, non-CSI Hayes compatible modems, satellite transmitters, cellular modems, and spread spectrum radios.
SC932に関するよくある質問の数: 2
The SC932 has jumpers inside to configure how the DTR and RTS lines operate in reference to the data logger’s modem enable line. There are no jumpers to configure in the SC932A; the DTR line is driven always, and the RTS line follows the data logger’s modem enable line. If the SC932A does not work with a modem, the issue may be corrected by disabling the hardware flow control and/or configuring the modem to ignore the status of the DTR line.
The SC932 is a retired product that has a 9-pin CS I/O connector and a 25-pin male serial DTE connector. It also has jumpers inside to configure how the DTR and RTS lines operate in reference to the data logger’s modem enable line.
The SC932A has a 9-pin CS I/O connector and a 9-pin male serial DTE connector. There are no jumpers to configure in the SC932A. The DTR line is driven always, and the RTS line follows the data logger’s modem enable line.
We've updated our privacy policy. 詳細はこちら
Update your cookie preferences. クッキーの設定を更新する