BALER Data File Client Software

一般的なプログラミングとデータ収集 / BALER

RETIRED ›
This product is no longer available and has been replaced by: LNDB.

Image Not Available

利用できるサービス

類似製品
詳細
仕様
互換性
ドキュメント
ダウンロード
よくある質問

概要

Current version: 4.0

The Baler software connects to the LoggerNet Server from a remote PC and creates bales of data at regular intervals based on the date/time stamps in the data. Baler's primary function is to access data on the LoggerNet server, bundle appropriate data, and store the data on the client computer.

利点と特徴

Extracts data from the LoggerNet Server cache and creates a data file
Allows multiple instances of Baler to bale data according to different conditions

類似製品

LoggerNet Remote リモートデータロガーサポートソフトウェア

LoggerNet Remote Upgrade 最新バージョンへのアップグレード

RTMCPRO リアルタイムモニタリング制御ソフトウェア、プロフェッショナル版

RTMCPRO/U 最新バージョンへのアップグレード

RTMCRT リアルタイムモニタリング及び制御ソフトウェアランタイム版

CSIWEBS CSI Web Server

CSIWEBS/U 最新バージョンへのアップグレード

詳細

The Baler client is ideal for applications in which the data will be imported to a database or a third-party analysis program.

Specifically, the Baler client:

Accesses data stored in the data cache of the LoggerNet server
Bales data into files at regular intervals based on the date/time stamps in the data
Names the “bales” according to the data logger, table names, and time of bale
Stores the data on the client PC
Logs status of baling events
Allows the user to run multiple instances of Baler to “bale” data at different intervals
Offers the option to execute a command line operation after each baling event

Unlike LoggerNetData and RTMCRT, Baler does not include functionality to view or interact with the data. The datafile names are based on the data logger and table names. Multiple instances of Baler can be run with separate working directories if data must be baled according to different conditions.

仕様

Current Version

4.0

互換性

注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。

Data Loggers

製品	互換性	注意
21X (リタイア)
CR10 (リタイア)
CR1000 (リタイア)
CR10X (リタイア)
CR200X (リタイア)
CR206X (リタイア)
CR211X (リタイア)
CR216X (リタイア)
CR23X (リタイア)
CR295X (リタイア)
CR3000 (リタイア)
CR500 (リタイア)
CR5000 (リタイア)
CR510 (リタイア)
CR800 (リタイア)
CR850 (リタイア)
CR9000 (リタイア)
CR9000X (リタイア)

互換性に関する追加情報

Software/Computer Requirements

Licensed copy of LoggerNet or LoggerNetAdmin running on a PC

ドキュメント

カタログ

Clients for LoggerNet (PC-OPC Server, LNDB, and LoggerNetData)

マニュアル

Baler Software

ダウンロード

BALER Patch v.4.0 (3.7 MB) 08-02-2010

RETIRED PRODUCT

Upgrade Baler version 2.2 or 3.4 to 4.0; no intermediate steps are required.

よくある質問

BALERに関するよくある質問の数： 10

すべて展開すべて折りたたむ

Can Baler be used to push data from a Windows server to a Unix server?

Yes, but a file transfer or copy program is needed. Baler includes an option to run a program 30 seconds after a baling event occurs. A batch file can be constructed that calls a program to move the contents of the folder with the baled files to a location on a Unix server. The batch file calls a program such as SCP and specifies the parameters of the command.

For more details, review the “Advanced Options” section of the Baler Instruction Manual.
If the Baler CD-ROM is lost, can the program be downloaded?

Currently, Campbell Scientific only distributes software on media. The possessor of the media is viewed as the holder of the license. If the CD is lost, a new license would have to be purchased.
Is there a patch for the current version of Baler?

The current version of Baler can be found in the Downloads section of the Baler product page. Note that Baler version 2.2 is required to be installed for this upgrade to work.
What might cause Baler to display “failed to create the file…” or an access permission error when starting up?

The destination folder for baled files is created during setup. If the program is not running under an account that has permissions for the destination folder, Baler displays one or both of these messages. To resolve this error, either run Baler under an administrator account, or set the permissions on the folder so that the account has full control.
How can a user start fresh with a new configuration settings file?

Baler program configuration information is stored in the baler.ini file that is found, in a default installation, in the C:\Campbellsci\Baler\sys\inifiles folder. If this file is renamed or moved, Baler starts up as if it was freshly installed.

The same thing can be accomplished by starting up the program with a new working directory using the /WorkDir command line parameter. For more details, review the “Command Line Options” section of the Baler Instruction Manual.
What can be done if a new table is not being baled by Baler?

Check that the new table has been selected on the Baler Baling Setup tab. (Selected tables should appear in the Selected Tables field on the right side of the screen.) If the new table has not been selected, click the Pause Baling button, click the desired table, and click the right-facing arrow to add it to the list. Then click the Enable Baling button to restart the baling process.

After restarting, Baler creates bales of the specified interval size for all of the data that currently exists in the LoggerNet cache and has not been baled yet.

If the table has been selected, but no data files are being created, check that the table is enabled for scheduled collection on the Table Status tab in Baler. If the Enable column of the table displays No, there is an issue in the LoggerNet Setup screen.

On the LoggerNet Setup screen, on the data logger Schedule tab, ensure that the Scheduled Collection Enabled checkbox is selected. Also, ensure that the data collection interval is set so that data is collected into the LoggerNet cache. In addition, on the Data Files tab, ensure that the table has the Included for Data Collection checkbox selected. Baler only bales data that has been collected into the LoggerNet data cache.

If everything appears correct in the LoggerNet Setup screen, start the LoggerNet Status Monitor, and ensure that the Pause Schedule checkbox isn’t selected. (Selecting that checkbox stops all scheduled data collection for all of the data loggers.) On the Status Monitor page, it is possible to check when the data was last collected for the data logger and when data will next be collected.
Does Baler 2.2 work with a CR800? Is a more recent version of Baler needed?

Baler 2.2 was developed before the release of the CR800 and, therefore, does not work with it.The latest version of Baler does work with the CR800 and can be found in the Downloads section of the Baler product page.

Note: As newer versions of Baler are released, upgrades to older versions may not work. The notes associated with the upgrade or patch indicate which previous version needs to be installed before installing the upgrade.
What is Baler?

Baler is a LoggerNet client (purchased separately from LoggerNet) that uses the records going into the LoggerNet data cache. Baler separates or “bales” files into user-defined chunks based on time and gives them a unique file name. This process is fully automated. For example, Baler can be set up to store files hourly, every 4 hours, or every 24 hours. The file name reflects the time stamp of the first record in the file. Baler does not insert a time-stamp string into the data file, but the file name indicates the time stamp. Because they are separate, the files created by Baler do not affect the other *.dat files created by LoggerNet.
LoggerNet で LNDB を使用するには Baler が必要ですか?

いいえ。LNDB は Baler とは独立して動作します。
In what format does the Baler Client Software save the data? Are there format options?

Baler does have file format options for storing the data. These are TOACI1 (table to ASCII 1 format), TOA5 (table to ASCII 5 format), TOB1 (table to binary format), or CSV (comma separated values).

TOACI1 example:

"TOACI1", "CR1000_2", "Data1Hr""TMSTAMP", "RECNBR", "Batt_Volt_Min", "Panel_TempF_Avg", "AirTempF_Avg", "RH", "WSData_S_WVT", "WSData_D1_WVT", "WSData_SD1_WVT", "WS_mph_Min", "WS_mph_Max", "WindDir_SMM", "SlrW_Avg", "Rain_in_Tot", "BP_inHg_Avg", "FuelM_Avg", " FuelT_F_Avg", "TdewF_Avg"
"2008-03-14 16:00:00" , 22, 13.07, 73.8, 72.98, 20.72, 0, 0, 0, 0, 0, -0.097, 0.021, 0, 26.34, 7999, 7999, 29.37

TOA5 example:

"TOA5", "CR1000_2", "CR1000", "1243", "CR1000.Std.14.16", "CPU:RAWS-F_V1-fixedGOES_Frank_H_Test.CR1", "52455", "Data1Hr""TIMESTAMP", "RECORD", "Batt_Volt_Min", "Panel_TempF_Avg", "AirTempF_Avg", "RH", "WSData_S_WVT", "WSData_D1_WVT", "WSData_SD1_WVT", "WS_mph_Min", "WS_mph_Max", "WindDir_SMM", "SlrW_Avg", "Rain_in_Tot", "BP_inHg_Avg", "FuelM_Avg", "FuelT_F_Avg", "TdewF_Avg"
"TS", "RN", "Volts", "Deg F", "Deg F", "%", "miles/hour", "Deg", "Deg", "miles/hour", "miles/hour", "Degrees", "W/m²", "inch", "In of Hg", "%", "Deg F", "Deg F"
"", "", "Min", "Avg", "Avg", "Smp", "WVc", "WVc", "WVc", "Min", "Max", "SMM", "Avg", "Tot", "Avg", "Avg", "Avg", "Avg"
"2008-03-14 16:00:00", 22, 13.07, 73.8, 72.98, 20.72, 0, 0, 0, 0, 0, -0.097, 0.021, 0, 26.34, "NAN", "NAN", 29.37

TOB1 example:

"TOB1", "CR1000_2", "CR1000", "1243", "CR1000.Std.14.16", "CPU:RAWS-F_V1-fixedGOES_Frank_H_Test.CR1", "52455", "Data1Hr"
"SECONDS", "NANOSECONDS", "RECORD", "Batt_Volt_Min", "Panel_TempF_Avg", "AirTempF_Avg", "RH", "WSData_S_WVT", "WSData_D1_WVT", "WSData_SD1_WVT", "WS_mph_Min", "WS_mph_Max", "WindDir_SMM", "SlrW_Avg", "Rain_in_Tot", "BP_inHg_Avg", "FuelM_Avg", "FuelT_F_Avg", "TdewF_Avg"
"SECONDS", "NANOSECONDS", "RN", "Volts", "Deg F", "Deg F", "%", "miles/hour", "Deg", "Deg", "miles/hour", "miles/hour", "Degrees", "W/m²", "inch", "In of Hg", "%", "Deg F", "Deg F"
"", "", "", "Min", "Avg", "Avg", "Smp", "WVc", "WVc", "WVc", "Min", "Max", "SMM", "Avg", "Tot", "Avg", "Avg", "Avg", "Avg"
"ULONG", "ULONG", "ULONG", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2", "FP2"

CSV example:

101, 2008, 74, 1600, 0, 13.07, 73.8, 72.98, 20.72, 0, 0, 0, 0, 0, -0.097, 0.021, 0, 26.34, 7999, 7999, 29.37

よくある質問一覧はこちら

Privacy Policy Update

We've updated our privacy policy. 詳細はこちら

Cookie Consent

Update your cookie preferences. クッキーの設定を更新する